It can be used as a vase or bowl. The material used is PLA.
Probably it has to rotate the STL model in the gcode program
The dimensions are:
Height: 120 mm
Width: 100 mm
The print parameters are:
Layer height (mm): 0.2
Shell thickness (mm): 1
Enable retraction: Yes
Bottom/Top thickness (mm): 0.8
Fill Density (%): 50
Print speed (mm/s): 30
Printing temperature (C): 200
Bed temperature (C): 0
Support type: None
Platform adhesion type: None
Diameter (mm): 1.75
Flow (%): 100
Nozzle size (mm): 0.5
The print time is about 14 hours and the weight arround 145 grams
Soy un ingeniero que se ha comprado una impresora 3D y se lo está pasando como un enano
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!