this is my latest digital sculpture, Bob the Beaver...
The figurine is about 11 cm high.
Certain elements require support: the beaver's body, tree trunk and feet.
The tail can be printed with or without support.
There is only one file foot and eye, these are the rights to have the eye and the left foot it must be inverted in your slicer before printing it.
I use loctite glue for assembly. You have to glue the tail before fixing the beaver on the trunk.
For information I give you my support settings (CURA):
Normal support in contact with the table top, support angle 40, line pattern, spacing distance 1.5, support Z distance 0.2, activate support interface and ceiling, support interface thickness 1mm
printer ANYCUBIC I3 MEGA
PLA 1.75 printing
print quality 0.1
wall thickness 1.6
filling density 20 %.
printing temperature 200° C
bed temperature 60°.
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!