This is a 3D printable model in two pieces of a Beast statue. This personal fantasy concept was made with ZBrush. Print each part then plug it together very easily.
I printed the 2 piece model with the Form 1+ printer from formlabs at a density of 0.05mm per layer, but should work fine with 0.1 too. The Model is 12cm high and hollow. It needs125ml of resin (supports included) for the 2 printing sessions (one per piece) at a time of 17 hours (with a density of 0.1mm you would have about 8hours).
The Leg-part Can contain small holes sometimes but they are easy to fix with a bit of resin or you paint it anyway (haven't done anything on the model you can see on the photos except an IPA bath and water).
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!