Articulated Robot Scorpion

FREE FOR THE FIRST 200 DOWNLOADS (or more we'll see! lol)
NOTE: FOR FULL ACCESS TO ALL MY MODELS, EXCLUSIVE STLs AND COMMERCIAL LICENSE, JOIN MY PATREON HERE:

https://www.patreon.com/PA1_MAKER

Just finished this one! Wanted to make a new articulated model and i choose this cute, detailed robot scorpion!!

A bit challenging to print but nothing really special for an articulated model. Good bed adhesion, nice overhangs and good bridge settings. The tolerances are smaller than usual on certain parts, so over-extrusion will weld the articulations together at those places. Watch for this carefully.
-100% support free
-Already placed in the good orientation

Do not use a brim! It will get stuck in the articulations. If you are experiencing bed adhesion problems, use a raft instead if you can. All the scorpions on the picture were printed with no brim and no raft. Only good bed adhesion and a skirt.

Two sizes are included.

-One scorpion which is 225mm long (suitable for Ender3 and Prusa mk3s

-Another one of 170mm long. For the Prusa mini Owners.

you can scale it if you want, but scaling it smaller than the prusa mini file can lead to some troubles. I didnt try smaller than this, so its "at your own risk" hehehe :p

Again, if you have any problems or questions, send me a message here or on my facebook page! I'll try to help you as much as i can! :)

https://www.facebook.com/PA1MAKER

To join my patreon for exclusive models:

https://www.patreon.com/PA1_MAKER

0.2 layer height or less
3 walls
10% infill
slow first layer
good calibration
Watch flow/over-extrusion.