Anthro Hairy Lion
- 580 views
- 1 like
- 0 downloads
3D model description
My version of the Hairy Lion but furry. I had this idea some time ago and it turned out to not be that hard to make. However, as it did take some effort and I am very proud of it, I chose to sell it.
3D printing settings
Print with 0.2 mm layer height and 0.4mm line width. If your printer doesn't work well with 0.2 mm layer height, I would suggest scaling the model and line width proportional to the nearest supported layer height.
Do not enable supports unless you really know what you are doing. there are some relatively steep overhangs but they shouldn't be a problem if you can print a benchy.
After the print is done, separate the hair from the support structures and carefully soften the hair (mane(?)) with a hairdryer or heat gun.
- 3D file format: STL
- 3D model size: X 116 × Y 113 × Z 57.5 mm
Makes created by the community
Best sellers of the category Art
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!