While you are printing this model, please bear in mind how complicated an articulated model is, joints may need a sanding and fitting depending on your accuracy of your printer/slicer . . . . As always recommended print orientation this time has to take into consideration the layer orientation as well to ensure strength in joints, so be warned it is not easy, yet at the same time each piece has its own challenge and if you follow my guide you will get along great.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
I have left the battery holder out of the files as power/batteries LED size is whatever you may use or not . . you may want to modify the model to take a different power source . .or no lights at all . .your choice
Bottom parts 17 items, top parts 19 items . .some of which you need more than one e.g. joints . .
2 sets of hands, 2 removable chest pieces and 2 heads . .
You will need to read the PDF to get the best out of assembly and printing orientation.
So a very high resolution file with lots of detail and full instructions.
All the parts have been printed and developed to print! I have spent some 500hrs plus designing and printing various joint designs in a multitude of materials and print orientations, manufacturing 2 full prototypes before finalising the design offered here . . The hands modified 2 times in total of the 2 alternatives, the thigh joints, pelvis belly parts up to 5 times each. All pieces have been tested and they print out very easy as long as you follow the settings in the PDF file .
Recently I have been asked “why this is not printing? “ Or “This is fill of holes when printed?” Etc. . . please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.
All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collection but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .
People ask me why the detail is so prominent (not just the Bimbo bits) but the muscle tone, anatomy, clothing etc. on my models . . well as they are primarily made/designed for my own collection I always sand down with fine emery then have models subjected to an Acetone vapor bath for 60 seconds . This seals the shells and makes a smoother appearance but removes some detail . . hence build more detail into the model . . hope you like.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!