Free 3d print Achillies
- 719 views
- 3 likes
- 25 downloads
3D model description
Achillies is a permanent resident in the Court of LUCRETIA.
Download for free for a limited time*
The Court of Lucretia Project:
One grand multi part print of many models arranged near Lucretia's statue.
I am currently working on scaling the figures and arranging the set. A 3D animated video is also in the works and will update their progress periodically.
3D printing settings
"Achillies - Version 2 - " By Ecludius- 3dprint info file.
This model was designed to print easily specifically for FDM 3D Printers, not tested with resin. The Prototype print settings (see photo) are listed below and may be adjusted to the Makers needs.
PRINTER: Creality CR10 S-4 (Modded for accuracy and stability).
Nozzle diameter: 0.40mm.
Print Height: 250mm.
Layer Height: 0.2mm. (For faster printing and better post processing result).
Bottom Layers: 4.
Outline Layers: 5.
Top Layers: 6.
Start points: For a cleaner print, Choose start points for a specific location to localize layer boundaries. (i.e. half the print beds X and Y maximum print dimensions).
Print speed: 20mm/s. for base layers and 15mm/s for figure.
Hot End Temp: 220c for base layers 215c for figure.
Retraction distance: 6.00mm. Extra restart distance = 0.
Retraction vertical lift: 0.20.
Retraction speed: 40mm/s.
Bed Temp: 68c.
Supports: Minimal, set to 65* and add where needed, pay attention to the angle settings and be sure to put strong supports under the hands.
Support pillar resolution: 3.5mm.
Support density: 25%. Be sure and set the support upper layers to 3 to prevent underside scarring.
Additions: Brim only, 4 outlines 2 layers offset 0.02mm.
Note: Monitor filament feed angle when printing tall objects. The spool may have to be reversed while printing to reduce tension that can break the feed line.
Comment: This is version 2 of Achillies. Version 1 is depicted in the print photos.
3D printer file information
3D design format: STL Folder details Close
- 3D model size: X 3.72 × Y 3.34 × Z 4.97 mm
- Publication date: 2021/06/06 at 09:19
- 3d print
Best sellers of the category Art
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!