- 223 views
- 1 like
- 2 downloads
3D model description
This is the design of a 3D printable watermill with a water pump that pours water on the wheel and makes it rotate.
The total size is ~ 241mm / 217mm / 200mm (width/length/height).
For the pond I used a tray I bought with a size of 180mm / 140mm / 52mm, but I included the stl file if you prefer to print it. It is recommended to print the pond and the water canal with 100% infill and to apply some special varnish to avoid water leakage.
Other parts I bought:
Silicone Rubber Hose 8x10mm (https://www.aliexpress.com/item/4001283598865.html)
Water Pump, minimum power is enough (https://www.aliexpress.com/item/4001131344708.html)
The model is designed to be screwed (2.5mm diameter) or stuck to a base (not included in the model). I used a 250*260mm wood plank and some moss to decorate it.
3D printing settings
Standard printing parameters:
Layer height: 0.24
Wall thickness: 1mm
Supports: 65º when needed
It is recommended to print the pond and the water canal with 100% infill and to apply some special varnish to avoid water leakage.
- 3D file format: STL
- Publication date: 2020/12/21 at 20:11
Page translated by automatic translation. See the original version.
Best sellers of the category Architecture
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!