PREMIUM N-Scale Building #1

This building is one of a set of buildings that I have created as an urban setting for any N-Scale model railroad or diorama. The 5 building set is a real life replica of buildings located on the east side of Osborne Street Village located in Winnipeg, Canada (my home town). I am currently developing models of 5 additional buildings on the west side of the same street. Stay tuned!

Building #1 is the Courtyard Building which sits at the corner of Osborne Street and River Avenue. It is a keystone building of the village. Notice the clock up on it's peak.
Google Street View: https://www.google.ca/maps/@49.8790721,-97.1464366,3a,43.2y,95.48h,100.94t/data=!3m6!1e1!3m4!1sK4pVPpb-xPQVWYLWLIO5Kw!2e0!7i13312!8i6656

Premium features:
- Removable roof structures that facilitate internal finishing
- Precision interior slots for installing clear windows
- Accessible interior walls for applying paint or wallpaper
- Can accommodate interior lighting with just a few drilled holes
- Each model is meticulously designed to scale (1:160)
- STL files are provided with and without overhang support structures

A FREE non-premium version of this building is available at https://cults3d.com/en/3d-model/architecture/n-scale-building-2-set

Links to other buildings in set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-1-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-2-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-3-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-4-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-5-set
https://cults3d.com/en/3d-model/architecture/n-scale-building-6-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-7-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-8-set
https://cults3d.com/en/3d-model/architecture/premium-n-scale-building-9-set

All my creations:
https://cults3d.com/en/users/MFouillard

(c) 2018 All rights reserved

SLICER SETTINGS for FDM 3D PRINTING

STL files are provided with and without designed-in support structures. I prefer using the designed-in supports but you can use slicer supports if you prefer.

The delicate window frames and signage required well tuned slicer settings for best results. Here are the Cura slicer settings I used on my 3D printer with exceptional results:

My FDM Printer

Prusa i3 Clone
0.4mm nozzle
Direct drive extruder

Key Settings - Important for my printer

Retraction (4.5mm)
Retract Speed (45mm/s)
Jerk (8mm/s)
Acceleration (1000mm/s2)
Combing (All)
Coasting (On)

General Settings - Can be tweaked for your printer

Material (1.75mm PLA)
Layer Height (0.24mm)
Walls (0.8mm)
Top/Bottom Layer (0.72mm)
Infill (10%)
Tool Temp (200C)
Bed Temp (60C)
Print Speed (60mm/s)
Wall Speed (30mm/s)
Adhesion (Skirt, Brim on larger buildings)
Support (Optional)