Skip to content

Petřín lookout tower (1891) - Prague

Download free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomastDownload free 3D printing templates Petřín lookout tower (1891) - Prague , tomast

Did you 3D print this model?

3D model description

Petřín Lookout Tower, one of the most prominent landmarks of Prague, was built as part of the Jubilee Exhibition in 1891 as a loose copy inspired by the Eiffel Tower (at a ratio of 1:5). It is 63.5 metres high, and 299 steps lead to its peak, which is at the same altitude as the real Eiffel Tower. The view from its top overlooks not only the whole city, but on a clear day you can see nearly all of Bohemia.
The model is created in a scale of 1: 500.
The original tower was built with smaller tip, now has bigger tip with telecommunicalion anthennas.

3D printing settings

Layer: 0,1 mm, infill 30%.
Printed with 0,3 mm nozzle, extrusion width set to 0,25 mm (the thinnest walls in original size are 0,3 mm).
My real printing time was about 14 hours.
For bottom archs was used a little manualaly positioned support.
A lots of cooling is needed, I was use an external 220V fan.
Antene parts are printed independently and assembled with superglue.

  • 3D model format: STL

Creator

License

CC BY SA

Similar 3D files

Best sellers of the category Architecture

Related contents


Add a comment


Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon, Gearbest, Banggood, Aliexpress or Ebay.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!