N-Scale House 'The Bridgeport' 1:160 Scale STL Files

This is a highly detailed 3D Printable N-scale model house. It is historically accurate and based on drawings from the 'Scientific American Magazine - 1891'. The file comes in four pieces, the 1st floor, 2nd floor, Roof and Pillars. The model also comes with a fully detailed interior with features including fireplaces on both floors, wood stove, pantry, scullery, kitchen, parlor, sewing room, two staircases, bedrooms, closets and more!

The model includes alignment features between all levels for convenience. The model levels can be glued together, I use Gorilla Super Glue Gel. The model can be painted, I use acrylic paint for PLA.

The dimensions of the assembled model are:

Width: 3 1/2" or 89.5mm
Depth: 5 1/16" or 129.1mm
Height: 3 7/16" or 87.6mm

If you have any questions please message me.

The model shown was printed on a Dremel 3D40 (non-heated) bed
Medium quality (0.2mm layer height) 60mm/s print speed
*I slow down the speed of the first three layers to (15mm/s) for better adhesion
**I also use Elmer's Purple School Glue to avoid ruined prints due to curling
The model with above settings takes 8h 32m print time and 92g of PLA