N-Scale House 'Syracuse I' 1:160 Scale STL Files

This is a 3D Printable N-scale model house. The design is modeled after a house in upstate New York. The file comes in four pieces, the 1st floor, 2nd floor, Roof and the Pillars. The model also comes with internal features including stairs, closets, bedrooms and a kitchen with counters, cupboards, sink stove and fridge!

The model includes alignment features between all levels for convenience. The model levels can be glued together, I use Gorilla Super Glue Gel. The model can be painted, I use acrylic paint for my PLA models.

The dimensions of the assembled model are:

Width: 72.7mm or 2.86"
Depth: 69.2mm or 2.72"
Height: 68.6mm or 2.70"

If you have any questions please message me.

The model shown was printed on a Dremel 3D40 (non-heated) bed
Medium quality (0.2mm layer height) 60mm/s print speed
*I slow down the speed of the first three layers to (15mm/s) for better adhesion
**I also use Elmer's Purple School glue to avoid ruined prints due to curling
The two story model shown with above settings takes 5h 53m print time and 49g of PLA