N-Scale House 'Historic Vincent Residence' 1:160 Scale STL Files

This is a highly detailed 3D Printable N-scale model house. It is an accurate recreation of the historic 'Vincent House' built in Edgartown MA circa 1672, which follows the Cape Cod architectural style and it is based on hand drawings and photos created during the buildings restoration in 1977. The file comes in 2 pieces, the 1st floor, 2nd floor/roof. The model also comes with internal features including large central fireplace with three hearths including brick detail, closets, bedrooms, winding staircase and a kitchen!

The model includes alignment features between all levels for convenience. The model levels can be glued together, I use Gorilla Super Glue Gel. The model can be painted, I use acrylic paint for PLA.

This design is modeled at 1:160 scale. The dimensions of the assembled model are:

Width: 84.8mm or 3.34"
Depth: 73.2mm or 2.88"
Height: 52.5mm or 2.08"

If you have any questions please message me
Visit my profile on Cults3D: https://cults3d.com/en/users/designfenix/creations
Where you can find some FREE downloads as a sample of my work.

SHIPPING: I will attempt to ship multiple orders together to reduce shipping costs, the difference will be refunded to your purchase.

The model shown was printed on a Dremel 3D40 (non-heated) bed
Medium quality (0.2mm layer height) 60mm/s print speed
*I slow down the speed of the first three layers to (15mm/s) for better adhesion
**I also use Elmer's Purple School glue to avoid ruined prints due to curling
The two story model shown with above settings takes 4h 39m print time and 40g of PLA