HO SCALE CONSTRUCTION OFFICE / JOBSITE TRAILER 10'x32'

This is the second trailer in this series and the next size up offered by this company. It has been designed for resin printing but FDM printers should be fine too. The siding design on this model is different from the 8'x20' model. It also has 2 doors, more windows, a larger ac unit and two sets of steps. There is a drain hole in the roof for resin printers and that's why the roof cap is added! This is not a feature of the real trailer but I thought it was an easy and forgivable embellishment to hide the drain hole. If you use filler or putty to fill in the hole then you will have a very accurate model! Helpful Hint-use clear resin when printing this model. Although I did not take the time to do this, you can mask off the windows or even just the porch lights by the doors and toss and LED light inside the trailer and you'll have a nice lighting effect for night scenes! This trailer has many uses on your layout or diorama. Use it in construction sites, refineries, railroad yards as a yard office and even for military sites.

Made for resin printing. Should work with FDM too. The model shown was printed with clear water washable resin. I admit that the model would look much better if I took the time to properly clean off and sand the support areas and spend more time doing better paint jobs. Please understand that I tend to rush through these processes in order to get the model out to you more quickly. I have about 7 to 10 models at any given time just sitting and waiting to get painted so I can include the pics with the listing. I could easily spend an enormous amount of time getting lost in the art of detail painting but if I did then I would only get 2 or 3 models listed a year. Well, ok maybe a few more than that but you get the point! If you take the time to calibrate your machine settings, sand and clean the prints and properly prime and paint them, then the detail in the models will come shining through!