Skip to content

G1 Constructicons Bonecrusher

Creation's quality: 5.0/5 (3 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Transformers G1 Constructicons Devastator Bonecrusher
figure tall 16.5cm
masterpiece at 125% resize

instruction manual in the zip file
Assembly require paper clips and cutter
Joints maybe loose

Designed by Tim Yeung

3D printing settings

printing with support and raft

  • 3D file format: ZIP
  • Last update: 2021/02/02 at 02:41
  • Publication date: 2020/05/08 at 23:31



Designs 17
Downloads 2.5k
Followers 332

I’m a fan of Transformers G1 MP 3D printing diy maker



Makes created by the community

Best sellers of the category Architecture

Add a comment



On Bonecrusher parts, A22 and A25 are missing the paperclip holes for parts A32 and A35

no changes on the hook

Wait hook looks new, did you changed the model?

when printing leg ball joints @ 125% increase half the amount 126% -125% = about .5mm much tighter and better

Arm ball joints 126% - 125% divide by 3. the small increase makes joints tighter and hold pose much better no need for glue as the glue just doesn't do it.

this works for all models

For the legends scale it's %63

for the picture with the newage crew, how was it rescaled? 70%?

To see updates, check out the updated photos on Hook's page. I was mortified with the first update pic but the 2nd one made me feel much better. I do wish people would post their builds.

Creator followed up! Thanks!

No Updates on Finished Accessories for people who already purchased your product?

Great work, but is there a picture of the full Devastator any where?

neon green is good,
no dark green (2kg buy 2)

I’m finally ready to start working on this. These are the filaments I looked at. I want to get as close as I can to the original color.

Makerbot 375-0053A Green (Tim’s suggestion)
AIO Bright Green (Dark)
eSun Peak Green (Dark)
Atomic Filament NeonGreenTranslucent (Dark)
Matterhackers Lime Green (Dull)
ColorFabb Intense Green (Slightly Darker)
Mika3D Silk Lime Green (Too light)
Push Plastic Green (Too dark)
Makeshaper Neon Green (Too Dark)
Toner Plastics Kryptonite Green (Slightly Darker)
Filament Innovations Neon Green (Very Close)
Toner Plastics Neon Green (Closest)

Legs part updated on 6/22/2020

Buddyleeee, I'm going to use 3d Solutech's apple green filament for the green parts, and then I think I will try spray painting the purple parts. I haven't decided yet if I want to go with a straight purple or a lighter, lilac shade.

I would commit to the insecticons too if you decided to make them. Super long shot but would ever consider Huffer? For this project, I’m still looking for the perfect color match. I’ve got it down to two vs. fifteen initially.

I guess I'll have to! You've got a likely buyer if you ever decide to do them.

Wait a long time

I am begging you, do the Insecticons next. Hasbro hasn't given us a good set yet, and they're such important and pivotal characters.

heyo:) just printed this figure. and for some reason the lower thighs when you slice them the knees just poof get deleted while slicing. so its just the thigh with a silky smooth bottom and no way to connect the lower leg.

Looking forward to completion

PLA 1.75 mm 1kg multiple color Makerbot RepRap.
shop on Ebay

I mean what brand. These are pretty specific colors.

PLA filament

Hi Tim, can you tell me which filaments these are? These colors are spot on.

summer 2020

what is your approximate time frame for the last two figures?

about 18 inch. pose-able figures

Anne Onymous Anne Onymous

How big do you estimate devastator to be and is it going to have joints or be static like g1? these figures look amazing, so I cant wait to see how the next piece will turn out

good idea. but i have to finish the devastator first

Good work,next G1 Dinobots maybe??! :)

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!