Skip to content

Bearing 12x18x4 mm

Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

See on youtube

Created to make as little friction as possible
Mini bearing 12x18x4 mm, great for projects with arduino robots or radio controlled models.
It must be printed lying on the bed and without supports.
once printed, try slowly to unlock the pad by turning it well (I recommend removing it immediately when printing is just finished). Then grease with mechanics grease or lithium grease. After a few minutes it will turn very well
it was tested on a radio controlled model up to 50km h for several hours, and it held up very well

3D printing settings

print them about 10 degrees higher than usual so as to improve layer adhesion, and fan off
layer 0.1 or 0.12
no support
fan off
pla or petg
printing speed 15mm / s

3D printer file information

  • 3D design format: STL Folder details Close
    • Cuscinetti 12x18x4 mm v2.stl

    Learn more about the formats

  • 3D model size: X 18 × Y 18 × Z 4 mm
  • Publication date: 2021-12-09 at 16:18





I am passionate about 3d printing and digital craftsmanship
now I try to create useful items for everyone
durable and usable
thanks everyone for the support

Issue with this design? Report a problem

Best sellers of the category Architecture

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via PayPal.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!