Customizable tool holder organizer for Creality ender 6

This tool holder allows you to hang for example your spatulas, cleaning brushes, tweezers... There is a support to put your original cutter.

I put Freecad files if you want to make changes.

Materials required for assembly:

• Hot glue gun

• Round file

• Knife

• 3D pen (optional)

• Allen key 3.0 (supplied with your 3D printer)

This tool holder allows you to hang, for example, your spatulas, cleaning brushes, tweezers ... There is a support to put your original cutting pliers.

Materials required for assembly:

• Hot glue gun

• Round file

-Knife

• 3D pen (optional)

• Allen key 3.0 (supplied with your 3D printer)

I put Freecad files if you want to make any changes

Side organizer for Ender 6 - Cura settings

For hooks:

Profile : Standard Quality 0.2 (leave in 0.2)

Filling: 100% Grid

Material and brand: PLA GEEETECH

Nozzle temperature: 200°C

Plateau bed temperature: 70°C (depending on the filament)

Speed: 80 mm/s

Retraction distance 8.0 mm*

Shrinkage speed 45.0 mm/s*.

Support: No

Tray adhesion type: Skirt

Printing time: 17 minutes per hook

               1h29 for 8 hooks

Size: 23x9x20mm

For the 2 plates

Profile : Standard Quality 0.2 (leave in 0.2)

Filling: 20% Grid

Material and brand: PLA GEEETECH

Nozzle temperature: 200°C

Plateau bed temperature: 70°C (depending on the filament)

Speed: 80 mm/s

Retraction distance 8.0 mm*

Shrinkage speed 45.0 mm/s*.

Support: Yes

Support positioning: Anywhere

Bracket overhang angle: 45.0

Tray adhesion type: Skirt

Printing time: 9h12 Right side plate

               9h53 Left side plate (with clamp support)

Size: 175x45x89 Left side

         175x20x89 Right side

• Depending on the filament, these parameters were taken with GEEETECH filaments

For the hooks:

Profile: Standard Quality 0.2 (leave in 0.2)

Infill: 100% Grid

Material and brand: PLA GEEETECH

Nozzle temperature: 200 ° C

Plateau bed temperature: 70 ° C (depending on the filament)

Speed: 80mm / s

Retract distance 8.0 mm

Retraction speed 45.0 mm / s*

Support: No

Board grip type: Skirt

Printing time: 17 minutes per hook

1h29 for 8 hooks

Size: 23x9x20mm

For the 2 plates:

Profile: Standard Quality 0.2 (leave in 0.2)

Infill: 20% Grid

Material and brand: PLA GEEETECH

Nozzle temperature: 200 ° C

Plateau bed temperature: 70 ° C (depending on the filament)

Speed: 80mm / s

Retracting distance 8.0 mm *

Retraction speed 45.0 mm / s *

Support: Yes

Positioning of supports: Anywhere

Support cantilever angle: 45.0 °

Board grip type: Skirt

Printing time: 9:12 am Right side plate

                     9:53 am Left side plate (with clamp support)

Size: 175x45x89 Left side

     175x20x89 Right side

• Depending on the filament, these parameters were taken with GEEETECH filaments