Zum Inhalt gehen

FLSUN SR-Gehäuse

?
Qualität der Kreation: 4,4/5 (8 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.

Beschreibung des 3D-Modells

Caisson pour FLSUN SR a fermeture magnétique avec ventilation active.

Merci de bien lire les notices avant de vous lancer dans l'impression pour ne pas vous tromper de fichier.

Ce caisson peut être installer que vous possédiez l'écran TFT70 ou non.

Montage fest auf dem Boden.

Montageanleitung im PDF-Format.

viele Versionen in den Dateien enthalten

  • Version für den Druck auf 30cm-Platten

  • Version, die ich für diejenigen erstellt habe, die den SR bedrucken möchten.

chaque version propose des pièces avec ou sans fixation extrudeur, avec ou sans poignée avec ou sans passage des fils de l'écran.

Liste der in der PDF-Datei zu erwerbenden Materialien (ca. 40€ + Filament)

récapitulatif :

12 Vis M4x16 (+ 2 optionnelles pour la poignée)

12 T-Muttern M4

2 Zielscheiben Durchmesser 8mm bis 10mm max

1 Tige filetée oder Tige aluminium de 8mm

1 Filetstück aus Eisen mit 6 mm Durchmesser

3 Plexiglasscheiben mit 1 mm Stärke

Caisson kompatibel mit dem Bildschirm BTT70

ACHTUNG, die geschnittene Version, die einen zentralen, vorstehenden Rand an der Tür hat, kann die Anwendung eines Filamentwechsels bei einer Druckhöhe von 297 mm verhindern.

Das ist der Grund, warum ich Sie ermutige, die Vollversion zu drucken.

update V2:(impactant les fichiers porte haut et porte bas)

  • ajout du fichier pour ceux qui ne possède pas l'écran

  • Unterdrückung der Beschriftung JLB Création intern auf "porte bas"

  • Korrektur der Dateitoleranz an der "unteren Pforte"

  • Hinzufügung von Verweisen auf die Produkte

  • einfachere Arboreszenz der Dateien

  • Einfügen von Bildern in die Datei "Poignée

  • ajout instruction en Anglais

Aktualisierung der V3:

  • Hinzufügung eines festen Leitfadens für die Montage (zur Befestigung des Alarmsystems)

  • ajout d'un fichier montant fixe guide spécial (permettant d'attacher le câble d'alim)

  • Hinzufügung einer Halterung zur Befestigung des Originalbildschirms

  • Hinzufügung einer Basis-Datenträgerdatei ohne Logo

  • Aktualisierung des Hinweises in den Versionen FR und EN.

Aktualisierung der V4:

  • Anhängen von Dateien für die aktive Belüftung

  • Einfügen von Dateien, die an die verschiedenen SR-Profilmodelle angepasst sind (siehe Foto V1 und V2)

  • Einfügen von Dateien zur Erleichterung des Eindrucks

Update V7 :

ajout d'un thermostat pour réguler la température du caisson.

fichier lien du matériel dans le PDF.


3D-Druckeinstellungen

Die Dateien wurden so gestaltet, dass sie keine Stützen haben. Legen Sie die Oberfläche auf die Platte.

Die Verschmutzungsgrenzen liegen bei 0,2 mm, wenn Ihr Drucker gut eingestellt ist, gibt es keine Montageprobleme.

Verwendete Parameter auf dem X1, der gedruckt hat:

Remplissage 25%

Geschwindigkeit 100mm/s

Verwendetes PLA: SOVB noir alumine 210°c

Kunststoffverbrauch bei Vollformat : 1600gr

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: ZIP Datei-Details Schließen
    • caisson FLSUN SR V7.zip
      • active fan Option/Active fan option EN.pdf
      • active fan Option/Active fan option FR.pdf
      • active fan Option/Cut version (printable on SR)/bride.stl
      • active fan Option/Cut version (printable on SR)/couvercle.stl
      • active fan Option/Cut version (printable on SR)/tuyere.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 1.stl
      • active fan Option/Cut version (printable on SR)/lement fixe supperieur ventilation avec extudeur part 2.stl
      • active fan Option/full version (more interesting)/bride.stl
      • active fan Option/full version (more interesting)/couvercle.stl
      • active fan Option/full version (more interesting)/tuyere.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation avec extrudeur.stl
      • active fan Option/full version (more interesting)/lement fixe superieur ventilation sans extrudeur.stl
      • active fan Option/thermostat file/boitier.stl
      • active fan Option/thermostat file/bride sonde.stl
      • active fan Option/thermostat file/couvercle.stl
      • active fan Option/thermostat file/support regulateur.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 2 X1.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre bas poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte centre haut poigne X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 1 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe cut part 2 X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe cut part 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe without extrudeur cut part 2 special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 1sans logo X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre bas cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte centre haut cut 2 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut 1 X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut cut wo TFT X1.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • Cut version (printable on SR)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • difficults d'impression (fail print)/Difficulty printing pillar.pdf
      • difficults d'impression (fail print)/difficult a imprimer les montants.pdf
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi bas montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable special V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi haut montant fixe guide cable V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe ecran V1.stl
      • difficults d'impression (fail print)/partie fixe/V1/demi montant fixe V1.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/avec jeu augment (more loose)/montant fixe guide cable special avec jeu.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi bas montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable special V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi haut montant fixe guide cable V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe ecran V2.stl
      • difficults d'impression (fail print)/partie fixe/V2/demi montant fixe V2.stl
      • difficults d'impression (fail print)/porte/demi montant droit X8.stl
      • difficults d'impression (fail print)/porte/demi montant gauche X8.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X12.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/With screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/porte haut without TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/avec support extrudeur (with extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre bas poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/centre haut poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/poigne X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/avec poigne (with handle)/Porte/Porte montant gauche X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie basse fixe X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe ss extrudeur special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/partie haute fixe X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe ecran V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable special V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe guide cable V1 X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/montant fixe V1 X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V1/support pour ecran origine V1 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable special X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe guide cable X3.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/montant fixe X11.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Partie fixe/V2/support ecran X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre bas X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/centre haut X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte bas sans logo X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte cale X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte charniere X2.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/porte haut w TFT70 X1.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant Droit X4.stl
      • full version (more interesting)/Without screen BTT TFT70/sans support extrudeur (Without extruder mounting)/ss poigne (without handle)/Porte/Porte montant gauche X4.stl
      • general instruction EN.pdf
      • instruction EN.pdf
      • instruction gnrales FR.pdf
      • instructions FR.pdf

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2022-04-01 17:10
  • Veröffentlichungsdatum: 2022-02-07 18:55

Copyright

©

Keywords

Creator

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Bestseller der Kategorie Werkzeuge


Kommentar hinzufügen


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!