Zum Inhalt gehen

Gelenkige Drachenklauen 2.0 UPDATE.

Qualität der Kreation: 3,8/5 (49 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
  • 👁 95,3k Aufrufs
  • 681 herunterladens

Beschreibung des 3D-Modells

Voll artikuliert Dragon Claws 2.0 aktualisiert für bessere Passform, neues Aussehen!!! 3-Knöchel-Finger 2.0 und (Daumen 2.0 ist wieder oben) sollte den meisten Menschen die Finger passen. Aber keine Garantien.

Du kannst auch klebrigen Schaumstoff auf der Innenseite verwenden, um den Durchmesser des Lochs zu verkleinern. Oder kleben Sie einen Handschuh hinein, damit er besser an der Hand hält.

Wie für die Montage habe ich zur Verfügung gestellt. Ein paar Bilder, um dir zu helfen. Dieses Modell kann mit 3D-gedruckten Stiften zusammengebaut werden.


Die Modelle sind in zwei Hälften geteilt. Und bereit, gedruckt zu werden. Sie brauchen Unterstützung. Und mindestens eine 20%ige Füllung. Ich empfehle eine dreifache Wand. Für die Stärke, aber nicht notwendig.

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: STL Datei-Details Schließen
    • 3-knuc 2.0 finger and thumb side hole split 2.stl
    • 3-knuc 2.0 finger and thumb side hole split 1.stl
    • 3-knuc 2.0 finger and thumb split base fixed.stl
    • 3-knuc 2.0 split mid 1.stl
    • 3-knuc 2.0 split mid 2.stl
    • 3-knuc 2.0 split mid-bot 1.stl
    • 3-knuc 2.0 split mid-bot 2.stl
    • 3-knuc 2.0 split tip 1.stl
    • 3-knuc 2.0 split tip 2.stl
    • Dragon skin full plate a.stl
    • FULL BED-3 Kuc 2.0 finger.stl
    • Finger pins and arms done.stl
    • Full Plate Thumb 2.0 split fix .stl
    • Full plate finger done (1).stl
    • Thumb 2.0 Tip split fix.stl
    • Thumb 2.0 Tip1 split fix.stl
    • Thumb 2.0 bot full.stl
    • Thumb 2.0 mid full fix.stl
    • Thumb 2.0 mid split 1 fix.stl
    • Thumb 2.0 mid split 2 fix.stl
    • Thumb 2.0 tip full fix .stl
    • Thumb full plate.stl
    • Thumb knuckle and pins.stl
    • Thumb mid.stl
    • Thumb tip.stl
    • arm1.stl
    • arm2.stl
    • finger knuckle slit.stl
    • finger mid bot slit.stl
    • finger mid top slit.stl
    • finger tip slit.stl
    • full peace bott mid.stl
    • full peace bott.stl
    • full peace tip.stl
    • full peace top mid.stl
    • new drag knuc side hole.stl
    • new drag knuc.stl
    • new drag mid1.stl
    • new drag mid2.stl
    • new drag tip1.stl
    • new drag tip2.stl
    • pins and arms All files.stl

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2021/09/27 21:44
  • Veröffentlichungsdatum: 2020/02/04 06:54





Boring 9 to 5 job by day. Self-taught3D artist by night. I love to create fun and challenging( for me) 3D models In my free time to share with the world.
If you happen to download one of my models, please share a picture of make with me.

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Von der Community erstellte Kreationen

Bestseller der Kategorie Verschiedene

Kommentar hinzufügen

33 Kommentare

how well does it work? and how hard is it to put together?

Works perfect.

Once you understand where everything needs to be its a piece of cake.

SAJA please keep in mind they do fit on the build plate on the photon but that is not the only obstacle I have print them out on my photon to make sure it work or someone else but you would still need fastening pins as they're meant to be made out of pla or abs and melted to hinge everything together. You cannot use the resin 3D printed pins. I did it this way because the fingers are made for my very large hands and I wanted people to be able to scale them down set their hands. so the pins Scale down with the fingers to fit perfectly. I personally have never assembled them in resin. If you have any further questions feel free to email me it's LinkedIn my profile. Thank you by the way if you do print them for yourself I would recommend starting at 80% scale. It's a good starting point size-wise for normal sized hands

  • 1 Like

So sorry...I just started clicking on the photos to see the other types and saw the "...resin friendly..." comment. My bad. :(

I haven't seen yet a reply as to whether or not it is possible to print this using a resin printer. Is it possible? I have an ANYCUBIC Photon S...with a build size of 4.53"(L) x 2.56"(W) x 6.49"(H). So...is it going to be possible? I would LOVE to support you and your designs.

Hi Evelinstrange I'm aware other people now have similar designs on there but I didn't see any that directly copied my design. But I'm hoping people will find Value in my designs. It takes a lot of time and effort to designed and sculpt these gloves from the ground up, countless hours of test fitting and printing to make sure that there easily assembled with 3D printed Parts no extra stuff like pins bolts. I tried to make them DIY friendly as much as possible, along with producing how to build diagrams and videos. Thanks

Something exactly like this (If not exactly this) is free on thingiverse.

Just saying...

Hello Alisea969
A good place to start is to figure out which style you like to print out. I have the different styles labeled in the picture above the original is just labeled fingers because that is the first one I designed. The 2.0 labeled ones have textured skins. From there and move on to the fact that if you have the ability to print a full plate I would strongly suggest you do this. The full plates are set up the correct orientation along with the fact if you need to scale for your fingers which I recommend. I would probably scale them down to 80% for a good starting position I have very large fingers and they were made for me. I would also add supports and a Brim. As far as how to assemble them they are basically the same parts that I used in my bone fingers which you can find an assembly video on my Instagram which will guide you in assembling them. If you need further help please don't hesitate to email me directly. Littletupp@gmail.com

hello; I have buied this stl, but don't understand what should I print and the build after printing, can you help me plz ? thanks

Yes it's steampunk versions in the works.

Hello, this is awesome, I printed it, scaling it to feet my finger, it look so cool.

Do you think you can make a bio-meca/steampunk version with some gears, pipe... ?

ALZORL Please see the third picture below the main picture to see the different styles .The originals fingers are labeled just finger or thumb because they were the first files uploaded. sorry for the confusion . But the rest should be labeled according to the picture. hope this helps.

Looking at the files, it's very confusing on which fingers are which. None of them are labeled which finger they are except for the thumb. So how do I know which files to print for which fingers, assuming I don't want to do the 2.0 versions?

I just bought this looks amazing but what files are just for the original files

Hi SKAMPP thanks for downloading. To help you out with assembling. They assemble the same way as the bone fingers you can check out the numbered step diagram under bone fingers and just apply to the dragon fingers. I hope that helps also when printing the finer Parts I find it's always better to use a Brim accompanied by supports helps hold the finer stuff in position on a delegate printing I usually use a 4 millimeter Brim with concentric or zigzag supports. Hopefully that will cut down on the failure rate. Happy printing

These are very cool! For under $7 I got an amazing design and a logic puzzle too! A little puzzling to start with on figuring how to put them together. Also the finger and thumb split base is the single most difficult thing I've ever tried to print, honestly, I get one good print out of three attempts. BUT IT'S WORTH IT!!! Thanks LittleTup!

Downloaded the file, it is damaged,can you send a working file?

Is there a video on how to assemble it?

Just finished printing a 2.0 thumb, cant wait, gonna be a lot of printing for 2 hands worth!

also another idea you should edit it and put a variety of sizes from kids to literally big handed adults

just a idea this would be a great start to working on assistive prosthetics , though i do not have a medical license because i spend my recreation in 3dprinting and shooting targets as a way to relax in peace without bothering anyone

I recommend printing a full plate setups they have all the parts you need for each finger. Also there's diagram pictures of assembly under my bone fingers you could use for reference. Any further difficulties please email me directly so I can help.

hi there !! First off i want to Thank you For what looks to be an awesome accessory to my cosplay hobby but i have one slight quibble,
In the description it states ....." As for assembly I provided. A few pictures to help guide you."..... could you please tell me how to make them visible as i cant see jack !! and im lost as F.....! without any instructions....
ive just paid 7 quid for a lot of stls which looks like one hell of a jigsaw puzzle!! and ta try put this togetha without any instructions is a bit of a bummer dude :( could you put up some pics to help ...:: ALSO FOLLOWING!! ;)

Sorry they're meant to be one size only. You could try scaling them down but remember the arms and pins would have to be scaled down to and I'm sure there's only a certain amount you can go before failure of the mechanical parts. That's why I suggested downsizing the holes to fit your fingers with a sticky foam in layers on the inside please check the pictures above.

how do i scale them for my hand? is there any instructions?

Check out my bone fingers it has a full diagram. same rules apply.

an assembly diagram would be super helpful or an exploded view so there is a tad more detail to put it together.

The longest print piece are 111mm x43 mm x 36mm . All the pre-configured full bed plates files are made to fit on a 220 mm x 220mm bed with a little room to spare. I hope that helps CAPTAINSTEAMFOX

How wide are the prints? I don't want to buy this super cool looking print and find out that my printer is too small to make it.

I designed The first one the three knuckle finger with . 2 mm in mind for a faster print. Seeing how people are going to print out. Five or ten of these . Also the dragon skin update 2 knuckle. Looks cleaner at .1mm.

What layer height resolution did you design this for? .1mm, .2mm? curious

It's there in the download; you may have to download it again to get the most up-to-date zip file, but in the one I grabbed there's "Dragon Skin Full Plate a.stl"
Print it five times and you've got a dragon hand :D

Also, it says Dragon Skin update, but there is no Dragon Skin version in the download.

I just bought this. Looks great, but I noticed only split versions of the files are included. I would like to print it on a resin printer for better detail and flexibility. Any chance of getting the uncut versions of the pieces?

Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon oder Aliexpress klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!