Zum Inhalt gehen

Hallo, du Schlingel! Du möchtest also mit ungezogenen 3D-Modellen Spaß haben?! So ist es richtig ;)

Aber auf Cults müssen kleine Kaninchen zuerst beweisen, dass sie alt genug sind.

Dino Dick Klassiker

?
Qualität der Kreation: 3,8/5 (104 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
  • 👁 224,4k Aufrufs
  • 422 Likes
  • 5,4k herunterladens

Beschreibung des 3D-Modells

Diese STL ist nur für den persönlichen Gebrauch bestimmt.

Sie dürfen es nicht in irgendeiner Form auf irgendeiner Plattform verkaufen.

Sie können die gedruckte Version davon nur in meinem Shop auf Etsy, iradj3d kaufen:

https://www.iradj3d.com/

Neue Version 8 No Need Supports

Einschließlich 3 Modelle :

1) Dino Dick Classic V8 Unterstützt Nein

2) Dino Dick Classic V6 Unterstützt Ja

3) Dino Dick Classic innen hohl für LED


3D-Druckeinstellungen

Dino Dick V10


Füllung 5%

Schichthöhe 0,2

Schale 2

Stütze Nein

Krempe Ja

Zeit 4h 30m

Gewicht 40g

Abmessung 69mmx143mmx120mm

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: STL Datei-Details Schließen
    • Dino_Dick_Hollow_V2_L2.stl
    • Dino_Dick_V10.stl
    • Dino_Dick_V6_L2.stl

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2021/11/03 22:33
  • Veröffentlichungsdatum: 2019/10/01 07:34

Copyright

©

Keywords

Creator

These STLs are for personal use only.
You're not allowed to sell it in Any form on Any platform.
You can buy the printed version of it Only at my shop on Etsy, iradj3d :

https://www.iradj3d.com/

Thanks

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Bestseller der Kategorie Frech


Kommentar hinzufügen

19 Kommentare

Can't get to printer in the center? printer close to very top of print bed any help

having same issue

the dino dick print very well .

  • 2 Likes

Will this need support or nah?

  • 1 Like

Thank you dear friend.
Happy 3d printing 👍

  • 1 Like

Thanks for your clarification and prompt replies. As I said I'm also a designer and know how it is when people steal my designs. Thanks also for the permission to sell. I will buy from you as agreed, one order for every 7 sold. :)

https://www.etsy.com/se-en/listing/902389046/dinodik-salt-shaker

Yes this is my design, I did it more than a year ago.
I don't know what is "ppl".
Unfortunately every body claim that is mine, many no Honest people copy it distribute it and use it without permission, this is not Fair, it cost only 4€, this mean paying around 0.5€ for each if you print 7, as I allow it, it is less than a price they pay for electricity or Filement.
But I was mentioning my Thanks to all the Honest people who buy it and respect the Licence Agreement.

Is this your design? I've information from ppl that claim you didn't. I'm a designer myself and know about the problems where ppl steal designs posting them as their own.

Shame on all Lier and Fraudsters 👍

You didn't model this. You have stolen the stl and just modify the balls sack. I know the guy who modeled it and he is definitely not you. Shame on you.

  • 1 Like

The model is not pre-supported, the support will be created by Slicer

Hello, I read that this was Pre-Supported? Is this not the case? After purchasing it is not pre-supported

So sorry about your judgment, this model is for fun and it's not a meme, yes it circulate on Net but I asked 4€ for printings 7 pieces, it means 50 cents for each, compared to electricity , Filement and other expenses, it is fair I suppose. I let it to your judgment to download it Freely or paying 4.5$, too much people sell printed version of it for more than $20, so paying 50 cents to me is not too much.
please have fun with it and don't be angry and insult someone who make you laugh with his creation ;-)

  • 1 Like

You're such an arse. Going around the internet copyright-striking every derivative work people have made from this. "Fuck-U-Saurus" (with a middle-finger hand in place of the tip), gone. Its further version, dick-fuck-u-saurus with the finger replaced by another dick (want to get meta?)... GONE. I bought this, but seeing every variant of this thing gone from everywhere on the internet makes me regret supporting you. Most people seem to do this stuff for fun, not for profit. Never even had to buy a 3D model before coming across this.

It's something fun, and it's a meme. You don't make memes expecting people to pay for them. You also don't go around Google Image Search to every site trying to copyright-strike every variant of the meme from every corner of the internet, hoping they'll pay your licensing fee and put food on the table.

Funny model, but honestly it's just going to be a reminder of the hardest time I ever had trying to find a model... just to find that the creator is an arse.

  • 2 Likes

Hi
Thank for your message. 
Unfortunately some peoples don't respect honesty, I earn my living by selling my models, mostly about 4€, but they don't understand it.
It would be nice by you if you send me their link.
Thanks for your support.

The weird thing is, this is on almost all the stl sites for free. You might want to claim an infringement on them. Same name and everything.

I paid for this along with other prints but I did not get this one... It's no where to be found!

"Support:yes"
well, what support settings? im a newb :(

  • 1 Like

si os gusta esto os gustaran mis diseños tb jeje.

Děkuji za přijeti s pozdravem Jiří .


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon oder Aliexpress klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!