Zum Inhalt gehen

Niedliches Flexi Print-in-Place Skelett

?
Qualität der Kreation: 4,4/5 (88 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
  • 👁 160,6k Aufrufs
  • 836 Likes
  • 5,2k herunterladens

Beschreibung des 3D-Modells

Dieses Flexi-Skelett ist ein gelenkiges Print-in-Place-Modell, das KEINE Stützen und keine Montage benötigt.

Enthalten sind 5 STLs

*Skeleton.STL ( Skelett mit hängendem Loch im Kopf...tanzend dargestellt)

*Skeleton_No_Hanging_Hole.STL (kein hängendes Loch im Kopf)

*Skeleton_Big_Top.STL (oben, um ein großes Skelett zu erstellen)

*Skeleton_Big_Top_No_Hanging_Hole .STL ( Top Zum Erstellen von Big Skeleton ohne Löcher im Rücken, um ihn aufzuhängen)

*Skeleton_Big_Bot.STL ( Unten Zum Erstellen eines großen Skeletts)

Es macht wirklich Spaß, mit ihm zu spielen, weil er herumhüpft und sich auf jede beliebige Weise bewegt.

Ich habe mehrere Iterationen durchlaufen, um sicherzustellen, dass er stabil und posierbar ist und sich leicht ohne Stützen drucken lässt.

Bitte stellen Sie Bilder Ihrer Drucke auf dieser Seite zur Verfügung, ich würde mich freuen, sie zu sehen.

Dankeschön.

Aktualisierung: 28.7.2021

DS von der Rückseite entfernt und die Gelenke dicker gemacht

P.S. Wenn dir mein Skelett gefällt, schau dir auch meine anderen Modelle an.

https://www.cults3d.com/en/users/FlexiFactory/creations


3D-Druckeinstellungen

Super einfach zu drucken.

Keine Stützen

Print-in-Place (keine Montage)

20% Füllung um sicher zu sein

PLA funktioniert hervorragend

Stellen Sie nur sicher, dass Sie eine gute Bett-Haftung haben.

*Wenn du das große Skelett erstellst, musst du an der Hüfte kleben. Das ist sehr einfach, ich empfehle dafür Sekundenkleber. Lege einfach etwas darunter, damit du nicht am Tisch klebst :)

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: STL Datei-Details Schließen
    • Skeleton.STL
    • Skeleton_Big_Bot.STL
    • Skeleton_Big_Top.STL
    • Skeleton_Big_Top_No_Hanging_Hole.STL
    • Skeleton_No_Hanging_Hole.STL

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2021/07/28 19:39
  • Veröffentlichungsdatum: 2020/04/18 00:56

Copyright

©

Keywords

Creator

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Kollektion im Zusammenhang mit diesem 3D-Modell


Von der Community erstellte Kreationen

Bestseller der Kategorie Kunst


Kommentar hinzufügen

36 Kommentare

Amo tus diseños; este es el primero que adquiero y me encantó. <3
Sólo tengo un inconveniente, logré imprimir uno correctamente, pero los siguientes intentos no han sido exitosos. ¿Tienes alguna recomendación? Estoy usando PLA y mi impresora es la Voxelab Aries. (La compré la semana pasada y aún no sé muy bien todos los parámetros).

Just bought this. Just wondering what Luminous (Glow in dark) PLA brand do you use? I have heard some brands are very adhesive and can clog the nozzle. Do you have any recommendations? Thanks in advance

no, sorry I only bought one and it got very brittle right after I bought it.

Bonjour, est-ce possible d'imprimer vos création "articuler" via une Elegoo Mars Résine ? Merci, en tous cas ça a l'air très chouette mon fils adorerait :D

  • 1 Like

Re je m'auto répond, cela fonctionne assez bien en résine, cependant beaucoup plus fragile que le filament, pensez a bien retirer les supports qui peuvent bloqué certaine partie articuler sinon dans l'ensemble ça rend super bien surtout les détaille

  • 1 Like

great, sorry for not replying in time. I personally never have but others, like you have mentioned that it works.

  • 1 Like

Any chance you could bend the arms in more on the big top model? He's a few mm to wide to fit on my Prusa MK3 when rotated even.

  • 1 Like

Thats Great! I'm going to post it to my page.

a lower speed and correct temperature control can help you

Hi, what do you recommend to increase enhance bed adhesion? I printed it but the foot came off while printing so it did not print it well. I use Ender 3 with glass bed and used PLA.

I really want to print this so much, but I don't have payment methods , can I get the stl for free if you don't mind pleaseeeee?

my email : ronicze@gmail.com

I really want to print this so much, but I don't have payment methods , can I get the stl for free if you don't mind pleaseeeee?

my email : ronicze@gmail.com

Cómo va el hilo para que se pueda colgar?

Do any of these flexi factory prints work on resin printers?

I BUY ALL ITEMS FROM YOUR STORE. NOW LET'S PRINT.
HUG,
JUNIOR

  • 1 Like

Everyone I know LOVES the skeleton! I printed one and hung it in our business as a Halloween decoration and it is the talk of the place! I also LOVE the hand!!! I will be printing the ant next! Please keep making these cause I will keep buying them! I love them all!

  • 1 Like

A nice model, but I wish the listing included measurements. Had to scale even the smaller version down quite a bit to fit on my build platform. And printing smaller the already challenging bed adhesion becomes a real struggle, even with a skirt/brim or a raft parts always come off :/ Don't have the option to change to glass+gluestick so have to make do with blue painter's tape and hairspray, which just isn't cutting it, it seems.

But a nice model nontetheless, even if not usable for me.

Merci pour ce petit personnage bien sympa!
:-)
David

Many Thanks Flexifactory, just printed the large skeleton and the small one, both turned out perfect. my Granddaughter is going to be very pleased with this.

  • 1 Like

I am unable to print this one, the head keeps shaking half way through the print, because the bottom of the head seems to lose adhesion with the print bed.

Thanks Flexifactory and Tainwulf, these tips really helped! Slowing the speed down to 40 for a better quality and the glue stick helping for a better stick to the bed without using too much of PLA, resulting in a faster print time. I now remixed the file making donut on top of the head so I can hang the skeleton on a thread for my cats to play with, they seem to love it as wel. Curious how long it lasts!

Yeah I just went on and added a brim since I haven't gotten around to using glue stick .. For me it was the hand first and actually the head afterwards. So I'm thinking my machine was at fault. Adjusted and added aforementioned brim to be on the safe side. Printed perfectly :)

hey spongymoose and lemons_28,
thanks for your purchase, adhesion can be an issue on the parts that have a smaller surface area, like the spine links. Personally I like to use glass and a glue stick to ensure it doesn't pop off while printing. Hope this helps.

These flexi prints are easily the quickest I've ever cashed out for an STL. Pretty much bought 'em all in one go.

Having a tad of trouble with the skeleton here as it seems to break off my plate. I've never had adhesion problems, but I'm sure it's an error on my side, so I'm finetuning and printing while writing.

Great work on these models once again. Hope there is more to come.

I've printed a bunch for my Haunted House crew. Generally I haven't needed much more then some glue stick on the build plate and a skirt. Rafts were a little overkill for me. Your experience may vary though depending on your printer and how used to it you are. My only real tip is to slow down the print speed to 40 in the slicer as I got under extrusion and thus really weak ribs when I left it at default 50.

I am new in 3D printing and really want to try some things out. Now i think 'just make sure you have good bed adhesion', really abstract. What adhesion method is recommend? Could i use Raft or would another method be better for the job?

does your file have a commercial limitation on it? Could I purchase the STL and sell the prints made with the file?

thank you

Hey LEOMOTAPHOTO, The last image was printed in Hatchbox Wood filament, then sanded and stained with minwax polyshade.

Yes I have upscaled it, I printed one at 300mm and it still works fine

I just downloaded this. Can it be scaled up without losing the fit of the joints? My print surface is 300x300mm and it would be fun to make him about 140%.

I already printed two of this, love it! How did you paint the last one on the photos of this model? Looks like wood.

Did this print! Works perfectly!

I really want to print thiss , but I don't have the payment methods ( still 16) , can I get the stl for free if you dont mindd?

my email : dorriman123@gmail.com

Fantastic design. Sliced with #Simplify3d , Normal quality, 30%, #felixprinter Excellent !!!

Hi Holycow,
Flexi print is just often used for this type of articulated model. It works great with PLA. however if you print it with a flexible filament I would love to see it. 👍

It says, "Flexi Print" in the title. Does this have to be printed with a flexible filament?

Hi I run the model through netfab online and that fixes models, I did print with 100% infill and .2 layer also printed with a brim and it printed fine, have now done a standard size plus a 10 inch one and the brim didn’t take too long to clean up.

Hi great design, but having problems where the ribs join the spine, they keep breaking away, tried different infill and layers the rest prints ok. Look forward to hearing if you can sort. Thanks

I get two issues with the skeleton. The head and ribs are not attached in your model. I can provide slicer image samples if needed.


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon oder Aliexpress klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!