Zum Inhalt gehen

Bing-shen year of Formosan macaques

?
Qualität der Kreation: 5,0/5 (3 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
  • 👁 10,2k Aufrufs
  • 118 Likes
  • 1k herunterladens

Beschreibung des 3D-Modells

Bing-shen year of Formosan macaques

In Chinese Zodiac, the year of the Monkey is in Feb. 8, 2016-Jan. 27, 2017. I designed Bing-shen year of Formosan macaques to celebrate the coming of a new year, and I hope to use this opportunity to draw attention for Formosan macaques in Taiwan.

Formosan macaques, Macaca cyclopis, have been inhabiting in Mountain Shou-shan in Taiwan for many years. In recent years, tourists or local residents involving in feeding macaques have been raising a controversial issue. The foraging behavior of these macaques have been changing, and the macaques have becoming dependent upon handouts increasingly. In addition, the intense monkey-human conflict have been occurred. Some of macaques snatched the food from tourists, and some even invaded into local houses. In response to these threat, the tourists or local residents around villages started to attack macaques. Some of macaques were found being poisoned and attacked by human as their body appeared with wounds. The conflict around villages were intense against the species and its protected status. Scientists reported that 200 of the species were missing. These were the worst environment for Formosan macaques habitation. Scientists started working on conservation measures to reduce the conflict, they tried to provide a less disturbed habitats for macaques. They suggested the best way to resolve the conflict is to stop feeding, disturbing and touching macaques, so that macaques can stop dependent on human and start back to their habitats.

As I designed Bing-shen year of Formosan macaques, I tried to left an imprint of time on their body. Thus, the foot of Bing-shen year of Formosan macaques are imprinted with Chinese words of Bing-shen.

Chinese sexagenary cycle is a means of recording days or years. Most of people believe that the year of the Monkey will be back in the period of 12 years. In fact, the same year of the Monkey will be back in a circulation of 60 years, that is, it takes 60 years to wait for the next the year of Bing-shen of the Monkey. I designed 24 of nodes on macaques’ body, and each of nodes are rotatable and adjustable, which permits the macaques to show variable dynamics and expressions. Each of rotatable nodes are representing each of 24 solar terms, climate changes of weather in a year, in Chinese Lunar calendar. As a full circulation of 24 solar terms completed, that means a new year is coming again. I looked forward this design of Bing-shen year of Formosan macaques would remind ourselves of precious time and hopes we can use the time in a meaningful way.


3D-Druckeinstellungen

  1. If the one piece model of monkey tail is not easy to bend, we suggest to print the composed tail model.

  2. Don't printing all models are small then 86% of original model size, and set up 0.15mm layer resolution.

Design Software - SketchUp

My settings
ABS
support angle 30 deg
z resolution 0.2mm
scale 100%

https://www.facebook.com/paperworkers
https://amaochan.work/
https://www.youtube.com/watch?v=1MdAZr_GWi8

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: STL Datei-Details Schließen
    • mq-belly.stl
    • mq-body.stl
    • mq-eye_black.stl
    • mq-eye_whites.stl
    • mq-face.stl
    • mq-head.stl
    • mq-left forearm-new.stl
    • mq-left upper arm-new.stl
    • mq-left_fingers.stl
    • mq-left_forearm.stl
    • mq-left_leg.stl
    • mq-left_thigh.stl
    • mq-left_toes.stl
    • mq-left_upper_arm.stl
    • mq-right forearm-new.stl
    • mq-right upper arm-new.stl
    • mq-right_fingers.stl
    • mq-right_forearm.stl
    • mq-right_leg.stl
    • mq-right_thigh.stl
    • mq-right_toes.stl
    • mq-right_upper_arm.stl
    • mq-shoulder_connector.stl
    • mq-tail.stl
    • mq-tail_block_version.stl
    • root.stl

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2016/12/29 03:48
  • Veröffentlichungsdatum: 2016/02/03 16:00

Lizenz

CC BY NC SA

Creator

Designs 13
Downloads 22,4k
Verkäufe 445 US$
Follower 578

I am a designer and an art creator, was drawing comic strips and illustrations from an early age. Paper craft and toys are my main directions in this decade. In 2015, I started self-learning in 3D printing, and applied this technology as an authoring tool. It’s really pleased the invention of 3D printing because it brings unlimited possibilities on creations. As a designer who loves mechanical structure and the beauty of dynamic, I begin to create robots and Automate as well. Hope these art crafts would bring more and more inspiration and imagination to all of you.

https://amaochan.work/
https://www.facebook.com/paperworkers/

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Kollektion im Zusammenhang mit diesem 3D-Modell


Bestseller der Kategorie Kunst


Kommentar hinzufügen


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon oder Aliexpress klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!