Turtle Pot

Scrolling through Instagram, I came across this 2D crocheted turtle pot holder - so I decided to revamp it for #3DPrinting and turn it into a 3D model. I thought the crocheted version was cute and figured it would be a great addition to a garden collection. The model was created and rendered in Autodesk Fusion 360. The pot itself has a drainage hole at the bottom, but also a drainage hole on the side for overwatering to collect in the outer ring. I have been working on my modeling skills for other objects and things that might be more organic and less geometric, so this was my third-ish attempt at it. I painted the model afterwards using Galeria Acrylic paints. (Apologies for the mess of gray paint, tried splatter - but it didn't turn out as I hoped.) Enjoy!

#ANYCUBICGARDEN

For this model, the settings were sliced in Simplify3D.
It was printed using an Artillery Sidewinder X1 and using Eryone 1.75mm PLA Matte Olive Green.
-Resolution: 0.2mm
-Infill: 12% (triangular)
-Nozzle/Bed Temp: 210C/60C
-Top/Bottom/Perimeters: 3/3/1
-Speed: 60mm/s
-No Supports are required for this model.
-Print Time (Approximately): 8H:46M:00S