Zum Inhalt gehen

Sole Roll

?
Qualität der Kreation: 0,0/5 (0 Stimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
  • 👁 906 Aufrufs
  • 5 Likes
  • 4 herunterladens

Beschreibung des 3D-Modells

Enjoy 3D printed wellness for your feet. Using this during your TV session, in the garden or other beloved places. Without batteries, no maintenance is required. Just print, assemble and wellness.
I like bioplastics so i used PLA for all parts. Which seems to me tough enough for a normal application. The "Massage Roller" has a housing for 608RS bearings. It's optional to use them. If you decide to not use bearings it can be happen that it makes squeezy noise when rolling. This can be avoid by applying a little bit of a non-mineral oil to the Support Shaft's.
Please be aware, once assembled it's very hard to disassemble it again without breaking it.
It take roughly 21 hours to print all parts, the material consumption is around 110g for the minimum requirements.


3D-Druckeinstellungen

IMPORTANT: Printing of all parts together can lead to much more retraction before the print head travels which leads to partially thicker walls. Means that your parts won't fit nicely together. If your slicer support you can adjust the "horizontal size compensation" for around -0.15mm (shrink).
Layer Height 150 microns
Top, Bottom Layers 3, better 5
Perimeters 2, better 3
Infill 20%, better 25%
For PLA i used a temperature of 215°C which bonds the layer much better than lower temperatures.
Nozzle Diameter 0.4mm is required

Bottom Plate, print placed as in the STL file.
Massage Roller, print placed as in the STL file and add supports just from the buildplate with a max angle of 89° that should place the supports only in the housing.
Roller Mounts, print placed as in the STL file, you can add supports
Support Shaft, print placed as in the STL file and enable the brim feature

Upon request i can send you prepared gcode for Prusa i3 MK2S and Generic PLA. Tested a lot for well material strength.

Informationen zur 3D-Druckerdatei

  • Format der Gestaltung 3D: STL Datei-Details Schließen
    • Bottom Plate.stl
    • Massage Roller.stl
    • Roller Mount, left.stl
    • Roller Mount, right.stl
    • Support Shaft.stl

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2021/03/15 12:49
  • Veröffentlichungsdatum: 2018/01/21 19:30

Copyright

©

Keywords

Creator

Design 1
Downloads 4
Verkäufe 4 US$
Follower 4
Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden

Bestseller der Kategorie Haus


Kommentar hinzufügen

5 Kommentare

The files are really that easy to print, now as the content of the files are oriented you just need to place them. Then follow the print recommendations and use the better option if you're in doubt with strength. All will be turn out well - you will be surprised. If you need further assistance or visual explanations please let me know.

Great, looking forward to try. Thank you for your fast response :-)
Will post pics of print when done.

Adjusted STL files, just place them on your build plate slice it and done. Add supports as described in the print settings.

Hello and thank you for your notice about the missing information. I've added some more detailed information. Please let me know if those impress you more. :) If not i will adjust the STL files so that the orientation is in there. No need for re-orientation then for your convenience. If you have issues please let me know, the design is very easy to print. Just write me here.

Just bought the design, but not impressed by the (partially missing) print and build instructions. Had hoped the doawnload included more details, but alas, no.
Infill?
What is the recommended print orientation for the parts, especially the rod?
Supports needed?
Please elaborate.


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon oder Aliexpress klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über PayPal eine Spende zukommen zu lassen.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!