Zum Inhalt gehen

InstaLamp

?
Qualität der Kreation: 5,0/5 (1 abstimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.

Designer

Beschreibung des 3D-Modells

When you like someone you double tap her/his instagram pic.
But when you want to show your real love, you know it’s not enough.

So I decided to create a smart Instagram-shaped real-life notification which, using a NodeMCU microcontroller, IFTTT service and adafruit.io, can be turned on from everywhere in the world, telling the one you love you are thinking of her/him.

It’s easy to print (no supports but for the small_base) and can be assembled as is – no glue required.

All the electronics are very cheap and everything is really simple to setup.

PARTS LIST
An ESP8266 microcontroller: https://amzn.to/38sF4JX
LED diode + jumper wires: https://amzn.to/2Ho5jp5
Micro USB cable + charger

SETUP
It’s easier than it seems, and there are a lot of guides on the web (youtube, instructables and google are great resources). The followings are the main steps, obviously not entirely exhaustive.
The arduino sketches and some helpful screenshots can be downloaded here: http://bit.ly/InstaLamp_

Hardware
1. Print all the parts and snap them together, except for the bottom lid;
2. Wire the LED to the ESP8266 board, with the positive pole connected to the D7 pin, and the negative to the ground (GND).
3. The LED can be turned into a more diffused light by sanding it with a piece of sandpaper.

ADAFRUIT
1. Register to adafruit.io and login
2. Create a new Feed and call it “Digital”
3. Create a new Dashboard and call it “InstaLamp”
4. Add a new toggle block, select “Digital” as Group/Feed, and set ON & OFF as button text.

IFTTT
1. Register to ifttt.com;
2. Create your own applet;
3. Add to “THIS” the trigger you prefer (can be Alexa, Google Home or – as I did – a simple Button, which can be activated from the IFTTT mobile app)
4. Add to “THAT” Adafruit > Send data to Adafruit IO; then connect to your account and select “Digital” From the feed name list, and type “ON” (without quotes) in the “Data to save” field;
5. Create your action and name it as you like.

Software
1. Flash the ESP8266 with NodeMCU (instructions here: https://nodemcu.readthedocs.io/en/master/);
2. Download and install the Arduino IDE (https://www.arduino.cc/en/Main/Software);
3. Open the settings, and add this URL in the Boards Manager URLs field (http://arduino.esp8266.com/stable/package_esp8266com_index.json)
4. Go to Tools > Board > Boards Manager, then Navigate to esp8266 by esp8266 community and install the software;
5. Go to Tools > Board and select your board (the one linked above is “Generic ESP8266 Module”);
6. Open the InstaLamp_blink.ino sketch, and then add these data: the wifi name and password, and your adafruit username and key, which can be found on the upper right corner on adafruit.io;
7. Compile and load the sketch to the board.

At this point, put the microcontroller in the small base with the pins facing upward, slide the bottom lid in, plug the usb cable and you should be all set and ready to share some love!

IF you’d like to manually turn on/off the lamp, simply repeat IFTTT steps 2-5, using “OFF” as “Data to save”, then the InstaLamp_on_off.ino sketch instead of the _blink one.

Hope you enjoyed this simple and fun IoT project :)

Informationen zur 3D-Druckerdatei

  • Designnummer: 108916
  • Format der Gestaltung 3D: STL und ZIP Datei-Details Schließen
    • Balloon.stl
    • Base_Small.stl
    • Bottom Lid.stl
    • Heart.stl
    • InstaLamp_Adafruit.zip
    • Screenshots.zip

    Mehr zu den Formaten

  • Letzte Aktualisierung: 2020-06-03 16:59
  • Veröffentlichungsdatum: 2020-02-15 09:21

Lizenz

CC BY - Namensnennung

Keywords

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen
Problem mit diesem Design? Ein Problem melden.

Kollektion im Zusammenhang mit diesem 3D-Modell


Besten Dateien für 3D-Drucker in der Kategorie Haus

Bestseller der Kategorie Haus


Kommentar hinzufügen


Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 3 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind vier Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen adblocker und klicke auf unsere Werbebanner.

  • MITGLIEDSCHAFT: Führe deine Onlineeinkäufe durch, indem du auf hier auf die uns zugehörigen Links bei Amazon klickst.

  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über Ko-FI eine Spende zukommen zu lassen 💜.

  • MUND-ZU-MUND-PROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!