
Has anyone had a successful print of this? (SMALL DOOR CUT-STONE FOR OPENFORGE AND OPENLOCK) if so what on and what settings? I and a friend of mine have both tried with no luck at all.
- 0 Likes
Achtung, liebe Freunde, es handelt sich nicht um einen privaten Nachrichtendienst, sondern um einen öffentlichen Diskussionsthread. Dies ist ein Ort des Austausches. Bitte bleibt höflich und respektvoll. Jegliche kommerziellen oder gehässigen Beiträge werden gelöscht. Wenn Sie ein bestimmtes Design erwähnen, fügen Sie bitte den Link oder den Titel des Designs in Ihrer Nachricht hinzu, damit die Konversation richtig geleitet werden kann. Wenn Sie Ihrem Beitrag Fotos beifügen möchten, können Sie Ihre Bilder bei einem kostenlosen Online-Bilder-Hosting-Dienst wie Imgbb hochladen und die Links zu den Bildern in Ihren Kommentar kopieren/einfügen. Viel Spaß beim Diskutieren!
Has anyone had a successful print of this? (SMALL DOOR CUT-STONE FOR OPENFORGE AND OPENLOCK) if so what on and what settings? I and a friend of mine have both tried with no luck at all.
Sorry for the extremely late reply. I originally published this on thingiverse and don't think to check here often. This is one of my earliest models and a bit rough. I've successfully printed this on an Ender 3 using the default profiles in Cura using tree supports set to touching buildplate. It might print without support with the experimental bridge settings turned on but I haven't personally tested that.