Zum Inhalt gehen

Achtung, liebe Freunde, es handelt sich nicht um einen privaten Nachrichtendienst, sondern um einen öffentlichen Diskussionsthread. Dies ist ein Ort des Austausches. Bitte bleibt höflich und respektvoll. Jegliche kommerziellen oder gehässigen Beiträge werden gelöscht. Wenn Sie ein bestimmtes Design erwähnen, fügen Sie bitte den Link oder den Titel des Designs in Ihrer Nachricht hinzu, damit die Konversation richtig geleitet werden kann. Wenn Sie Ihrem Beitrag Fotos beifügen möchten, können Sie Ihre Bilder bei einem kostenlosen Online-Bilder-Hosting-Dienst wie Imgbb hochladen und die Links zu den Bildern in Ihren Kommentar kopieren/einfügen. Viel Spaß beim Diskutieren!

Schreibe deine Nachricht:

67 Kommentare

Hola una consulta que diferencia hay entre estos modelos tel mismo juego que tenés para revender..
Hay diferencia de calidad ? O tiene tu marca impresa?

Hola, no se de que modelo hablas pero mis modelos en esta plataforma son solo para uso personal. Si desea venderlos, puede contactarme en kaan@aslanonline.com y con una tarifa adicional de derechos comerciales, puede comenzar a vender los modelos físicos en cualquier mercado. La calidad de estos modelos es la misma.

i downloaded the model and only 3 are in the set that is available for download, Please send me 4 file or refund me

Thank you very much for letting me know about the problem. The missing file has been uploaded already.


 i am writing to you because furry87 has purchased some stl files which you are selling on cults3d.com.  it uses your files to sell the printed designs on etsy.com.  here is the link: https://www.etsy.com/fr/listing/1170461441/insigne-de-police-de-racoon-city?ref=shop_home_active_13 .  

It does the same with my files.  

he advertises his 3d prints on facebook.  his name is Chris Googley Miller on Facebook.  he has to stop making money with our creations.

Laurent Fabregat 

Hi can you make me a stl file of the numbers 25 with "twenty five" written in script under the numbers can pay. Cookie cutter and stamp. Thanks

Hi, yes sure. Could please contact me from my email? kaan@aslanonline.com


Hello, I love your cookie cutter, I bought the download and was wondering if it would okay to sell some prints?

Hello, thank you very much for your interest in my designs. I appreciate it. I only have maybe 5 or 10 percent of my models which are for commercial use and in order to be able to sell them you need to buy the right listings which is indicating that it has the commercial rights in the description. I checked the models you purchased but un fortunately they're only for personal use. If you really want to sell them commercially, please get in touch with me from my email. It's kaan@aslanonline.com and if you paypal me the extra commercial license that I'll calculate for you, you can use them commercially as well. I'll be waiting to hear from you.


hi there
i bought the Happy Easter bunny file and the picture shows it has the embosser and also a debosser but the download only gave me the embosser.......does it not come with the debosser as thats what i wanted. thankyou

Hello! Thank you very much for your interest in my designs. I appreciate it. You're totally right. The file is missing. It should be included as shown in the picture. I've just uploaded the missing file. Thank you very much for warning me about this. Happy printings :)

Hello, I bought a nutcracker cookie cutter and stamp from you, but when printing the stamp it cannot print when it goes to the detailed parts, and when I print it at 0.2, it cannot print because the eye parts are too thin. Can you help me with this? (I use Prusa Slicer.)

Hello! Thank you very much for reaching out. I tried that model several times without making any tweak. Even with 0.3mm Layer Height everything prints very well. Can you send a photo of your sliced model to kaan@aslanonline.com ? It would be easier for me to understand what is going on in your Prusa Slicer.

Hello again, I received your email and it looks like the slicer shows everything perfectly fine. But your printed sample doesn't seem perfect yet. But I believe it's only related with your slicer settings. Because the model's eye and other small details are higher than 1.5mm in size and there is no anywhere in the model less then this size. I also use Prusa Slicer and I print my files with a Prusa MK3S+, I suggest you to tweak your slicer settings. There is also another thing you can try. I suggest you to subscribe to Facebook Prusa Users community and share the printed model. I believe you're going to get more valuable suggestions there to improve your print quality. I hope this helps you for the next steps.

Valentine Cookie Cutter (Alternative) 5 <---- a file is missing in the download .. there is only the frame and not the central file with the heart and the x :|

Hello, I'm so sorry for this. I'm uploading the missing file now. Thank you for the warning.

Thank you. I have done this and, although it fixes the problem with the mouth, it means the buckle in the belt type piece around the hat is so compacted that it does not come out in the impression.


Ok no worries. I'm updated the file with a thicker mouth :) You'll get notified about the update very soon :)

Hi! I was looking for some new Valentine’s Day cookie cutter designs! Can you please get back to me. Thank you!

Hello, yes sure. Can you write me from my email please?

The Leprechaun I have just purchased does not work. The mouth is too small / thin so that it does not print as one complete piece. If you slice it using Prusa silcer you will see this without the need to print it. Could you edit it / make one that does work and send it to me please.


Hello Nick,

If you're using a Prusa Slicer to slice the models, you should check XY compensation setting. Please make it 0.15 or 0.2 and retry :)

Hi, i have just emailed you this same message, we are after some earring size shapes (3cm) in the shape of kangaroos, sunglasses, thongs and the map of Australia, can you help us out

Hello, thank you very much. I replied your email!

I just purchased your winnie the pooh set and it seems to be missing the cutter for the balloon stamp.
Also, your description says that all your designs have the commercial rights to sell the physical product however the title says 'for personal use only'. Can these ones be sold?

Hello! Thank you very much for your interest in my designs. I appreciate it. I've updated the models right away. Sorry for the inconvenience. About the commercial rights, this model doesn't have any explanation about commercial rights. It's only for personal use. My general description is about the custom designs you order personally from me :) If you ask me to make a custom design from me, I grant you with all the commercial rights of the physical cutters. But the winnie the pooh set is as explained in the title, is only for personal use. If there is no any explanation in the description that the model can be used commercially, it's always for personal use. Thank you very much for your understanding.

If you wish to sell the Winnie the pooh set commercially, please get in touch with me via kaan@aslanonline.com. Thanks.

Hello Alfred, thank you very much for your interest in my designs. I sold the same set to many other customers and I never had a feedback about they were not working. I don't know what the specific problem is but it looks like you find the walls a little too thick for your taste. There are different ways to make the walls thinner before you print the models.

If you're using a Prusa Slicer to slice the models, you should check XY compensation setting and try some minus values like -0.10 or -0.15. You can find the right setting which will for for you.

If you're using Cura to slice the models, then the corresponding setting name for this is Horizontal Expansion. Please find that setting and apply a minus value like -0.10 or maybe -0.15, -0.20. After you slice the models, you can leave it at a setting of your taste.

If you use positive values to this setting, it will make the walls thicker, the minus values will make the walls thinner.

I hope this helps :)

Kind regards,


I bought your nutcracker cookie cutter and I was wondering do you maybe have coloring scheme for him?

Thanks in advance :)

Hello, thank you very much for your interest :) To be honest, It's been a long time I designed that cookie cutter and I really don't remember which schema I used :)) Are you planning to paint the sugardough?

Hi, I am planing to color the sugar coating, so any kind of help would be great :)

I see. To be honest, I can't say anything clear now but I suggest you to check Pinterest Nutcracker models. There are many of them. I'm sure you can find a nutcracker model that you would like the color scheme. :) Then you can try those colors on the cookie :)

Thank you for making these. My daughter will enjoy them!

Thank you very much :) I hope you all enjoy doing cookies with them :) Add some cinnamon powder to the cutters to have a better visual prints on the dough :)?

Hi, I just wanted to say your christmas embossers are so good.love that you are not just doing stamps embossers are the way forward. Thank you

Hi, what a consindence :) I just sent you a message and you sent me a message too :) I'm happy you like the designs. Please contact me from kaan@aslanonline.com. The pieces you bough are actually a few models of a big bundle that I haven't shared anywhere yet. So if you're interested, I'll send you the model photos via email :)

Thank you again!

  • 1 Like

Hola, tienes unos diseños de cortadores de navidad de 12 personajes, pero solo me interesan 4, podríamos llegar a un acuerdo? te envié un correo, gracias

hi can I apply for other books like yours but written in Italian? type ; auguri - auguri mamma - auguri papa' - congratulazioni - Il mio Battesimo - La mia Prima Comunione - buon compleanno

I wrote you an mail thanks

Hello, thank you very much. I have replied your email half an hour ago :) See you there :)

Hi, I'm toying with purchasing the Boom all designs bundle after really liking the Halloween bundle but I really like some of the newer designs, is there a more up-to-date all in one option?

Hello, I can definitely help you to combine it with my all newer models. Would you mind contacting me via email? My address is kaan@aslanonline.com

I’ll be waiting for your email

Thank you very much for your interest in my designs.


Hi there I was just wondering if you have any other paw patrol characters? I can see Zuma but was wondering if you had Chase and Rubble? I downloaded and printed your bluey characters and love the quality of print so was hoping to use you again :) Thanks Catherine

Hello Catherine, yes I do :) I can help you from my email if you contact me :) It’s kaan@aslanonline.com

I’ll be waiting to hear from you :)

Thank you very much for your kind words :)

Hi! I purchased your Halloween Cutter Set of 12. It didn't say what the cutter size was and was looking for a mini cookie STL. Do you have anything like that?

Hi, thank you very much for your interest in my designs. To be honest size won’t be a problem. If you want those models in smaller size, I can show you the way to make them smaller according to your needs. Almost all the slicers can resize the STL files. Which slicer are you using?


I'm just wondering how much custom cookie stamps cost and cursive standalone names that can be used as wedding favours. Also, what is the turnaround time when designing a stamp.

Thank you for your time,

Hello, thank you very much for your interest. My price range is between $2.5 (mostly for basic geometric shapes) and $5 for custom cookie cutters according to the complexity. Anything can be made. I’ve been working with many decent shops and cookie sellers around the world and having custom orders every day. One custom order should take about 10-20 minutes according to the complexity. I work 7 days a week. It doesn’t matter when you send me your orders :) I let you know if I’m too busy or if there might be some delays.

My custom designs have the right for commercial sales so you don’t need to pay anything for commercial license. It’s already included.

You can also order exclusive designs which won’t be designed or sold to anyone else.

These are the all infos I can give you now but if you wish to discuss more details you can always contact me from my email kaan@aslanonline.com or from my whatsapp number: +905326719603


Hi I just bought a file from you. A snake cutter. I just realised its an STL and i need it in cbt format. Is that possible? Ill pay extra if needed.

Thank you!

Hello Alexia, no need for payment :) But unfortunately, the software I'm using to design my models, doesn't support the file format you are asking. I can't export or save it in cbt format. I'm sorry for this :(

Hello i purchased this file yesterday and all the files print the same way where the top rim comes away. anyway to fix this? there is a gap around the edge in all files.

Hello, you're definitely right! I didn't see that before. Thank you for the warning. I've updated the model and uploaded it to cults. Could you please download and try again?