hgreg4
HELLO STEVE
how did you power your fans on the motherboard please, I don't see where to connect them. Thank you for your answer.
- 0 Likes
Achtung, liebe Freunde, es handelt sich nicht um einen privaten Nachrichtendienst, sondern um einen öffentlichen Diskussionsthread. Dies ist ein Ort des Austausches. Bitte bleibt höflich und respektvoll. Jegliche kommerziellen oder gehässigen Beiträge werden gelöscht. Wenn Sie ein bestimmtes Design erwähnen, fügen Sie bitte den Link oder den Titel des Designs in Ihrer Nachricht hinzu, damit die Konversation richtig geleitet werden kann. Wenn Sie Ihrem Beitrag Fotos beifügen möchten, können Sie Ihre Bilder bei einem kostenlosen Online-Bilder-Hosting-Dienst wie Imgbb hochladen und die Links zu den Bildern in Ihren Kommentar kopieren/einfügen. Viel Spaß beim Diskutieren!
Schreibe deine Nachricht:
8 Kommentare
hgreg4
The fans and Led are powered independently so as not to interfere with the printer's motherboard power supply.
- 0 Likes
Hello, I am considering purchasing the air duct inserts you have but I wanted to ask you did you notice a difference in cooling when these were installed, Im considering this or 5015 blower modification. just wanted to ask. thank you
- 0 Likes
Hi, absolutely yes, the ducts have been specially created to improve cooling and the specific direction of the air! They weren't created for beauty!
- 0 Likes
thank you for your answer. Jo
- 1 Like
Bonjour, votre solution pour les parrois latérales m'intéresse. Ma question : pourquoi pour installer les bases inférieures, il est nécessaire de démonter le couvercle de la base inférieure, le transformateur et l'interrupteur d'alimentation (y compris les connexions).
merci pour votre réponse. Jo
- 1 Like
Hi Jo, if you look at the third picture you see that you cannot insert the base from above because the plate protrudes. If you insert it from under the switch it must be removed because it protrudes! It's a beginner's operation to unplug and plug everything back together.
- 0 Likes
Bonjour
Excusez-moi, j’ai acheté vos modèles pour les supports de sécheur sunlu s2 sur flsun.
Je les ai imprimé mais les trous ne sont pas modélisés, est-ce normal?
Cordialement
Steve
- 0 Likes
Qu'est-ce que tu entends par "modélisé" ?
- 0 Likes
A l’impression des modèles à monter avec les vis d’origine, les trous des vis ne sont pas présents sur le slicer (cura).
Ça m’imprime des pièces à percer par moi même
- 0 Likes
Hi, I downloaded the stl models from the site and uploaded them in Cura 5.2.2. I see the models correctly with the holes... Other guys have downloaded the models and had no problems..
- 0 Likes
Ok thanks for the answer. I am doing it again now, and everything is ok.
Sorry.
- 0 Likes
I am happy!
- 0 Likes
this is the flat panel glass/poly version?
- 0 Likes
Look in my collection, you can find the flat screen front closure...
- 0 Likes
SIDE CLOSURE FOR THE PRINTER MODEL FLSUN V400 Is the flat glass/poly version?
- 0 Likes
Look in my collection, you can find the flat screen front closure...
- 0 Likes
Hallo, wie lang sollen die Schrauben sein, für Halter an Trockner?
- 0 Likes
Hi, look in the description :-)
- 0 Likes
Hi, thanks ^^ But could you possibly make the extinguishers a little deeper? I have M3.5x30 but they don't grip properly. Original screws go about 7.5mm into the hole, your holder comes out about 5mm. could you lower it by 3mm?
- 0 Likes
If the supports do not adhere to the external cover you can shorten the screws!
- 0 Likes
The screw isn't too long, it doesn't come out far enough. The screw would have to be about 3mm further in to grip. Hence the question of whether you could make the hole about 3mm deeper? The original bolt grips about 7.5-8mm, the 3.5x30 only comes through about 5mm and that's about 3mm thinner than the rest of the bolt.
- 0 Likes
YOUR E-MAIL ADDRESS? I WILL SEND YOU THE FILES WITH HOLES LONGER THAN 3MM. LET ME KNOW WHICH SCREW LENGTH YOU USE I WRITE IT IN THE MODEL DESCRIPTION.
- 0 Likes
hi, I can't seem to send an email address? Message not released?
- 1 Like
Write me: mtbpropassionATgmailPOINTcom
- 0 Likes
where did you get the curved side panels made?
- 0 Likes
I bought the panels at the supermarket.
- 0 Likes
