Zum Inhalt gehen

Achtung, liebe Freunde, es handelt sich nicht um einen privaten Nachrichtendienst, sondern um einen öffentlichen Diskussionsthread. Dies ist ein Ort des Austausches. Bitte bleibt höflich und respektvoll. Jegliche kommerziellen oder gehässigen Beiträge werden gelöscht. Wenn Sie ein bestimmtes Design erwähnen, fügen Sie bitte den Link oder den Titel des Designs in Ihrer Nachricht hinzu, damit die Konversation richtig geleitet werden kann. Wenn Sie Ihrem Beitrag Fotos beifügen möchten, können Sie Ihre Bilder bei einem kostenlosen Online-Bilder-Hosting-Dienst wie Imgbb hochladen und die Links zu den Bildern in Ihren Kommentar kopieren/einfügen. Viel Spaß beim Diskutieren!

Schreibe deine Nachricht:

6 Kommentare

would it be possible to add a set of dimensions to a readme on the file download to help with proper scaling. I scaled up the part to 200% to make a set of big drawers and now the drawers are not scaling properly and I'd like to double check with proper dimensions from the creator.

Hi there - I purchased your hive drawers back in mid 2020. I had fair luck but the interlocking shells have been simply too tight and require sanding and such. I'm looking to know if maybe there was an update to the STL since I see a later updated date on the cult3d page or if you have advice to make this a little less tight. I am seeing you mention printing at 102% and I hadn't tried that so I'll experiment there but thought I'd send a note. Thanks for the design, regardless!

Hi there - I purchased your hive drawers back in mid 2020. I had fair luck but the interlocking shells have been simply too tight and require sanding and such. I'm looking to know if maybe there was an update to the STL since I see a later updated date on the cult3d page or if you have advice to make this a little less tight. I am seeing you mention printing at 102% and I hadn't tried that so I'll experiment there but thought I'd send a note. Thanks for the design, regardless!

Daniel.  I'm new to 3D. Could you possibly advise roughly how much it might cost to print one of the elements in your  Modular Wine Rack ?
https://cults3d.com/en/3d-model/home/modular-wine-rack-o3d.

I like the asymmetry of the design and suspect it may be both relatively efficient in terms of the amount of material as well as stronger in more than one direction, is that correct?
Many thanks, John

Hello Kai,

Thank you for letting me know. I have added the knob!

Regards,
Dan

Hi,
sorry to disturb but I bought your evo box design because I printed some of your other boxes and wanted to pay back for the effort you spend. But sadly on cult the knob for the evo boxes is missing.
Could you somehow add it?

Thx in advance

Regards,
Kai