Zum Inhalt gehen

Gyro Winder / Watch Winder / Watch winder

Qualität des Makes: 5,0/5 (1 abstimmen)
Bewertung von Mitgliedern zur Qualität des 3D-Drucks, der Nachbearbeitung, des Fotos usw.

Beschreibung des Makes

Slicer = Cura
Took about 8-10 hours to print.
The 40% infill recommended seems to me to be excessive. I used 15% and my model is strong.

Update about one year later: The winder has been running continuously for an entire year. Apart from a few loose screws, it has worked impeccably A software-engineer friend rewrote the code which is now much more succinct. You can download it here: http://www.whatimade.today/arduino-code-for-a-watchwinder-2/


Creality Ender3


Generic PL
  • Raft: Nein
  • Auflösung: 0,15 mm
  • Temperatur: 210 ℃
  • Support: Nein
  • Infill: 15 %
  • Geschwindigkeit 50 mm/s

Andere Makes desselben 3D-Modells

Kommentar hinzufügen