Ir al contenido

Geared Spinner

Descripción del modelo 3D

Saw a lots of geared spinners in ig, so i decide to make my own. It uses standard 608zz 8x22x7mm bearings. The tolerances are exact so if it cracks print again with a 1 or 2% increase
Have Fun!

Parámetros de impresión 3D

Print settings:

Infill: 20% to 100%. It doest really make a difference in the material thats used.

Rafts: In the structure, so it sticks well to the bed, its little an it has little addition

Supports: No.

  • Formato de modelo 3D : STL





Creaciones similares

Añadir un comentario