Ir al contenido

Ankly Robot - 3d Printed Assembled

Descripción del modelo 3D

Articulated Robot design. His name es Ankly
It is printed articulated, without need of later assembly.
A challenge for your printer, you must adjust it well to be able to print it since the tolerances for the joints are minimal.
Once printed it is necessary to review and remove the small supports of the piece.

You will find two files one at 100% in size and another at 80%.
( 100% size it is easier to get good results)


Parámetros de impresión 3D

Rafts: No
Resolution: 0.2mm (size:100%) 0.16mm(size 80%)

Infill: 20% (to 100% size) 40% (to 80% size)

To print at 80% of its size, I recommend choosing file "80 little puppet Ankly.stl"
Layer Height: 0.16mm
Wall thickness: 1.2mm
Infill density: 40%
Wall speed: 35mm/s
Infill speed: 60mm/s

  • Formato de modelo 3D : STL



I was born in Madrid, Spain. I started drawing and modeling in my early childhood. I studied Fine Arts at the University of Madrid (Complutense). I specialized in sculpture and went on to study modelling and ceramics in in Madrid Ceramics School. I worked as a graphic designer for eight years and then as an illustrator for several years. I am also a sculptor and like create articulated dolls. I invite you to see my website ​




Creaciones similares

Añadir un comentario