Skip to content

Wooden box Ikea mount for bicycle

3D model description

I made an attachment for an ikea wooden box to attach it to my bike easily.

I use the wooden box ikea KNAGGLIG (702.923.59).

I fix all printed part to the wooden box with wooden screws.

I also protected the case with linseed oil and reinforced it with some wooden srews.

You can print all without support.

You can find foot for this wooden box Ikea mount for bicycle here : https://cults3d.com/en/various/foot-for-my-wooden-box-ikea-mount-for-bicycle

You can find holder for Vanguard tripod for this wooden box Ikea mount for bicycle here : https://cults3d.com/en/various/holder-for-vanguard-tripod-for-my-wooden-box-ikea

You can find holder for bicycle rear lights for this wooden box Ikea mount for bicycle here : https://cults3d.com/en/various/holder-for-bicycle-rear-lights-wooden-box-ikea

And ... that work so enjoy :D

3D printing settings

Printer:
Prussa I3 Geetech proB

Rafts:
No

Supports:
No

Resolution:
0.3 mm Nozzle - 0.15 mm Layer height

Infill:
20%

Creator

Membre du Fablab Nantais PlateformeC.
Je fabrique, je créer, je design et surtout je m'amuse :D

Share

License

CC BY NC SA

Similar creations


Add a comment