Skip to content

N64 Raspberry Pi Case

3D model description

3d printable N64 case to house your Raspberry Pi 2/3.
I use 2 2.5x20 screws to secure it shut, but it will hold without.

No screws needed for Rpi, platic clips are already part of the model.

Boitier N64 pour Raspberry Pi 2/3
J'utilise 2 vis 2.5x20 par sécurité, mais le boîtier tient normalement fermé sans.

Pas de vis pour le Rpi, le modèle a des petits clips pour le maintenir en place.

3D printing settings

Printed on a Prusa i3 mk2

No Rafts

Supports only for the top part

Resolution: 0.2

Infill: 10%

Notes:

I only use support for the Top part.

Settings:
Overhang threshold> 5°
Pattern spacing > 5mm
Interface layers> 0

Other parameters are default.

I have added 2 braces, on the left side, where there is a hole for USB and Ethernet ports. This is to help prevent warping. They can easily be cut off after print is finished.

  • 3D model format: STL

Tags

Creator

Share

License

CC BY NC SA

Similar creations


Add a comment