Skip to content

Raspberry Pi (2 & 3) Lab Plate

3D model description

Nice little plate holding your stuff together when playing with your Raspberry Pi 2 or 3.

Notes:

If you have a dual extruder printer, you can add a differently colored text by using the second extruder and one of the text stl files.
There are two versions of the text, one at the exact same height as the surrounding plate (text.stl), and one slightly sunk into the plate (text2.stl).
If you have a single extruder printer, just use labplate.stl.
To attach your breadboard, use double sided installation tape.

I used:

The Adafruit full sized breadboard
Tesa 55733 for attaching the breadboard

3D printing settings

Printer:
BCN3D Sigma

Rafts:
No

Supports:
No

Infill:
15%

  • 3D model format: STL

Creator

Share

License

CC BY NC SA

Similar creations


Add a comment

One comment

Thank you so much!!