Skip to content

Spool Holder

3D model description

A new door reels ... I know ... but my door reels :)
My design is nothing original: I have been largely inspired from existing door reels and therefore are very similar to the one I did. But this one I designed it from scratch, just for fun :) This is my 1st object.
I wanted it solid, which can be loaded by one side, and made of a single block to make simple (no axis to be added, no bearings, ...)

It is adapted to the dimensions of the filament coils of 750g that I use:
External Diameter 200mm
Internal Diameter 52mm
Thickness 55mm
Its dimensions can of course be adapted to the need.

Once printed with 0.2mm resolution / 17% filling, the weight is about 90g.
A SLAM Object;)
I hope you will like it!

3D printing settings

0.2mm resolution
17% filling
No support required

Creator

Je me suis lancé dans le design d'objets 3D en 2017, suite à l'acquisition d'une incroyable Dagoma DiscoEasy 200! Depuis, je passe mon temps à réaliser mes SLAM Objects =) Bon design à tous!

Share

License

CC BY

Similar creations


Add a comment