The Bubbly One.
Hmmm, The only thing i can say about the bubbly is: HAVE FUN!
LOL Just kidding.
A request from the hostess.
If i wanted to make a mold for the bubbly one.
This model you can make in different states.
The original i made with 8 M3x12 bolts with the heads cut off.
And with steel clamps.
Or you can make it with 3d printed clamps.
And 3d printed Pins.
The choice is yours!
I have bin asked before what kind of silicone i used.
The silicone i used was supplied by hostess of the party's
But some people use:
Dragon Skin Silicone Rubber Compound > https://www.smooth-on.com/product-line/dragon-skin/ <
Refills from: > http://empirelabs.com/ <
there is a instruction video on molding with silicone at > http://sexshop3d.com/videos/ <
Like the: https://cults3d.com/en/naughties/mold-for-the-bishop-v1
If you download this model you also get the original stl file of the Bubbly One.
The mold i printed 0.1 mm layer height.
The clamps and pins in 0,2 mm layer height.
Shell thickness 0.8.
Bottom/Top thickness 0.8
Mold, Clamps, Pins infill: 25%
The pins you break off the brim
Hello all, I'm Bishop.
In real life I'm a mechanical engineer.
But in my spare time i love making 3d models.,3d printing and playing with arduino's and raspberry pi's
I love making models for other people like,
milling machines, 3d printers, jewelry, practical things and yes also naughty toys,
and a lot off other stuff.
I hope you will like and enjoy my models!