My english is good but not super, so bare with me!
Some time ago i was approached by a woman who organizes dildo party's (like Tupperware party's) and gives dildo workshops, mostly for bachelor party's for woman
She ask me if i would be interested in making a mold of a dildo?
Honestly a little bitt out off my comfort zone.
But after some thought i decided to do it.
Good learning experience for making a mold.
And what better dildo to use than the Bishop V1
I did some research on the internet for making a 3d printed mold.
Thirst thing i noticed most of the molds i have seen use nuts and bolts to hold the mold together.
I find this such a hassle that decided to use clips.
BUT i did use some M3 bolts to center the model.
Print one side of the model like it is in the file.
And print the other side of the mold in mirror
I printed the mold in PLA, this is for the minimum warping.
Ensure that surface of the mold's are flat and smooth.
I cut of the heads of 9 M3x16 bolts to use for the centering of the model.
And used glue on one side of the mold to hold the bolts in place.
Extra: If you download this model you also get the original stl file of the Bishop V1
Layer Height: Your Choice
For the model in picture i used 0.2
Shell thickness: 0.8
Bottom/Top thickness 0.8
Hello all, I'm Bishop.
In real life I'm a mechanical engineer.
But in my spare time i love making 3d models.,3d printing and playing with arduino's and raspberry pi's
I love making models for other people like,
milling machines, 3d printers, jewelry, practical things and yes also naughty toys,
and a lot off other stuff.
I hope you will like and enjoy my models!