Skip to content
The Sorceress STL model, dubi01

Did you 3D print this model?

The Sorceress

3D Model

Make's Description

This was made on a creality cr10 printer, using ziro 3d pla filament at 215c nozzle and 50c bed temps. Printed at 150% at 60mm/sec. I used netfab to make sure there was no errors in the model and s3d to slice it with 30% infill. The model took just over 8 hours to print, with no support and very minimal stringing on the arms.

3D Printer

Creality CR10


  • Raft: Non
  • Resolution: 0.2 mm
  • Temperature: 215 °C
  • Support: Non
  • Infill: 30 %
  • Speed: 60 mm/s

Add a comment