Skip to content

Did you 3D print this model?

SD Card Hub

3D model description

***Note this is a digital file (STL printable file) only.

Printable SD Card Hub file. Fits 7 standard SD cards.

Included is a .txt file with print settings and finishing instructions.

3D printing settings

Recommended Print Settings:

Filament choice is not important.
Use recommended temperature settings for filament chosen.
Support is optional but overhang performance needs to be decent.
Infill - 20%
Layer Height - 0.2mm
Orientation - laying on side.

  • 3D model format: ZIP

Tags

Creator

Share

License

CC BY NC ND

Similar creations


Add a comment