Skip to content

Eumakers Xmas ball

3D model description

Xmas Ball consists in a two part big Christmas ball.

It is very easy to assemble, and permits two color combinations.

After printing the two halves, all you have to do, is pass a thread through them and make a knot at the ends.

Then, it will be ready to be hanged as a window decoration.

Designed by Helder Santos

3D printing settings

PRINTING NOTES
IN CASE YOU HAVE SOME DIFFICULTIES IN PRINTING THE "Xmas_Ball.stl" FILE, YOU CAN TRY USING "Xmas_Ball_Rotated.stl" FILE INSTEAD.

SLICE ENGINE - CURA 15.04.2

EXTRUDER TEP | 213ºC
COOLING | 0-10%

  • BASIC TAB

Layer Height | 0.20 mm
Shell Thickness | 0.8 mm
Enable Retraction | On
Bottom/Top Thickness | 0.8 mm
Fill Density | 100%
Print Speed | 50 mm/s
Support Type | NO
Platform Adhesion Type | BRIM - Brim Line Amount | 5

  • ADVANCED TAB

Nozzle Size | 0.4 mm
Initial Layer Thickness | 0.3 mm
Travel Speed | 250 mm/s
Bottom Layers Speed | 20 mm/s
Infill Speed | 50 mm/s
Top/Bottom Speed | 25 mm/s
Outer Shell speed | 40 mm/s
Inner Shell Speed | 50 mm/s
Minimal Layer Time | 5 mm/s
Enable Cooling Fan | OFF

  • RETRACTION

Minimal Travel | 1.5 mm
Minimal Extrusion Before Retracting | 0.02 mm
Z Hop When Retracting | 0 mm
Retracting Length | 6.0 mm
Retracting Speed | 45 mm/s

Creator

Eumakers, started in early 2014, is an high quality filament manifacture, providing also 3D printers, 3D scanners and all the related printing services.

Website: www.eumakers.com

Share

License

CC BY NC ND

Similar creations


Add a comment