Skip to content

FPV TPU Protection Eachine TX01 / TX02 / TX03

3D model description

Here is a protection in TPU for the different camera eachine TX01, TX02, TX03

camera eachine TX01 / 25mW:
http://www.banggood.com/Eachine-TX01-Super-Mini-AIO-5_8G-40CH-25MW-VTX-600TVL-14-Cmos-FPV-Transmitter-p-1088374.html?p=LD020411878172015024

Camera eachine TX02 / 200mw:
http://www.banggood.com/Eachine-TX02-Super-Mini-AIO-5_8G-40CH-200mW-VTX-600TVL-14-Cmos-FPV-Camera-p-1088368.html?rmmds=myorder?p=LD020411878172015024

Camera eachine TX03 25mw/50mw / 200mw:

http://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?rmmds=myorder?p=LD020411878172015024

It is very easy to adjust the tilt of the camera and it can fall back in case of shock.

The ABS base preferably + the TPU camera envelope + the headband made directly from the 3D coil wire
There are versions in wire of 2.75 mm and in wire of 1.75mm
There are several versions for the TX01 and 02 and for the TX03 which is larger
It takes just two screws M1.6 10mm to secure the two parts

3D printing settings

TPU ultimaker: 235 ° / 70 ° max: 50mm / s

  • 3D model format: STL

Tags

Creator

Fighter controlled obsolescence.

Facebook

Share

License

CC BY NC SA

Similar creations


Add a comment