Skip to content

Magnetic spectacle box

3D model description

Magnetic spectacle box
Model to be printed twice: height 170mm, width 80mm, height 27mm.
4 holes for magnets of diameter 6mm, length 20mm
Examples of neodymium magnets: http://www.creavea.com/aimant-neodyme-allonge-15-x-6-mm-5-pcs_boutique-acheter-loisirs-creatifs_15867.html

  • Push the magnets into the holes in each part, pay attention to their polarity.
  • Glue the felt inside each part with double-sided tape
  • Your magnetic goggle housing is ready!

Printed on a Prusa I3 Mendel with PLA.

https://blog.tfrichet.fr/modele-3d-boite-a-lunettes-aimantee/

3D printing settings

Layer Thickness: 0.3mm
Hull Thickness: 0.6mm
Filling level: 20%

Printing time: 03h30

To be printed standing up to avoid peeling!

  • 3D model format: STL

Creator

Share

License

CC BY NC SA

Similar creations


Add a comment