Skip to content

Low Poly Superhero 01

3D model description

Thank you for choosing to download the 'Low Poly Superhero 01'. This design was inspired by Marvel's classic superhero, Captain America. To create this figure, I used the 'Low Poly Male Figure' as the base form (also available for download). This is the first of many iconic characters I plan on making through 3D printing.

Follow me on Instagram at 'biglildesign' and see the design process behind this character and more.

Happy 3D printing!

3D printing settings

  • 'Low Poly Superhero 01' was 3D printed in PLA on the Ultimaker 2 with Cura software.

  • It is recommended that all parts especially the head are printed in high quality (0.1mm micron layer height).

  • When importing the parts into your slicer program, they should come in at the optimized print orientation.

  • If printed at 100%, Low Poly Superhero 01 stands at 228.6mm (9") tall.

  • Gluing is required to join the parts together.

  • The Low Poly Superhero 01 was painted with acrylic paint. A fine tip brush is recommended when painting the Head, Body, and Shield.

  • The list below includes part names and raft/support settings:

Head x 1 / no raft / yes support
Body x 1 / no raft / no support
Shoulder_L x 1 / no raft / no support
Shoulder_R x 1 / no raft / no support
Elbow_L x 1 / no raft / no support
Elbow_R x 1 / no raft / no support
Hand_L x 1 / no raft / no support
Hand_R x 1 / no raft / no support
Belt x 1 / no raft / no support
Connector x 1 / no raft / no support
Legs x 1 / no raft / no support
Boot_L x 1 / no raft / no support
Boot_R x 1 / no raft / no support
Foot_L x 1 / no raft / no support
Foot_R x 1 / no raft / no support
Shield_Outside x 1 / no raft / no support
Shield_Inside x 1 / no raft / yes support
Figure_All x 1 / yes raft / yes support
Shield_All x 1 / no raft / yes support
Shield_Connector x 1 / no raft / no support

Message me if you would like a pair of free neodymium magnets to insert to the shield and left forearm. The size of the magnets is 6mm diameter by 2.8mm thick. I have limited supply so message me ASAP!

  • 3D model format: STL

Tags

Creator

3D printing BIG ideas into LiL things.
Follow me on Instagram

Share

License

CC BY NC ND

Similar creations


Add a comment

One comment

Awesome design & print! Congrats BigLilDesign! 🙏